Alder 4/4 Lumber

Close this
Add a Headline
What are your comments?
How familiar are you with it?
How would you describe yourself?
(optional)
Only used to notify you about your review
SKU: ald44
Alder 4/4 Lumber

$7.99 /Board Feet

1-99 $7.99 /Bd. Ft.
100+ $5.99 /Bd. Ft. (25% off)
Tip: mix or match for your best price! Details

Pick Up In Store

Sorry, not available for online purchase at this time
Tempe
Tucson
Phoenix

About Lumber Sizes & Shipping Length Restrictions

4" to 6" Widths

Price shown is for a random selection of widths within this range. You can request specific widths or add a straight edge rip in the order form.

6' to 10' Lengths

This is the range of lengths that we might have in stock. The length you receive depends on how much you order.

Length Shipping Restrictions
84" (7') long max
We always try to ship the longest lengths possible.
8' to 12' long is possible
8' and longer can be shipped truck freight, but this method is usually economical only for shipments that are at least 450 lbs (approx 100-150 board feet depending on the wood).

13/16" Thickness

Also known as 4/4, S2S. Surfaced 2 sides (S2S) from rough sawn lumber. You should be able to yield approximately 3/4" thickness after you flatten, plane, shape or sand your project parts to fit your project
Learn more in our blog: "What Does 4/4 Mean in Lumber?"

How Lumber Ordering Works

1

Decide how much you need in Board Feet. Best way to get help with this is to use our Project Planner worksheet

2

Consider how much extra you want for arranging grain or color, fixing mistakes, testing cut set ups or finishes.

3

Choose your size requirements, if you have any, in the order form.

Weight

2.33

lbs /Bd. Ft.
-34.92% lighter than red oak (3.58 /bd. ft.)
Hardness

590

Janka Rating
-54.26% softer than red oak (1290 psi)
Density

0.41

Specific Gravity
-35.94% less dense than red oak (.64)

General Workability
Easy 2/10
Red Oak

Wood Texture
V. Fine 2/10
Red Oak

Ease of Finishing
Good 4/10
Red Oak

map of where Alder tree grows

(Alnus rubra)
Alder grows in North America

View All Alder Products

color of Alder
Color Range
Pale Yellow to Reddish Brown.
the Alder tree
What's The Tree Like?
A relatively small tree, reaching about 50ft in height and producing a trunk in diameter up to 15".
other names for Alder
Other Names
Alder, Oregon alder, Pacific coast alder, Red alder, Western alder
uses for Alder
Some Typical Uses
Rustic furniture, entry doors, moldings, turning, carving, toys, plywood, veneer, cabinets, musical instruments.

Lumber 101: What to Know About Hardwood Lumber

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
  1. Pick a wood you like
  2. Decide how much you need
  3. Give us your specs (if you have any)

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our blog for the full explanation.

lumber thickness Lumber Compared
Various lumber thickness as compared to one another

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained
12 Reviews
90%
Overall
Pages 1   2
5
August 15th, 2021
Verified Buyer
John
Visalia California
Alder
Great lumber
5
May 11th, 2020
Verified Buyer
Charlie
Helen ga
Semi-Professional Woodworker
Service
Excellent choice of wood and excellent service Charlie
Familiarity: I've used it once or twice
5
April 30th, 2020
Verified Buyer
n/a
Bethel OH
Vanity project
Ordered some alder, hard to find where I'm at. Lumber came when it was supposed to, high quality lumber, finished as specified.
5
September 4th, 2019
Verified Buyer
Pop Pop
Jacksonville FL
Alder
Great piece of wood, you all provided me with a very useful lumber choice that I can maximize the full piece you sent me. This is my second order and have not been disappointed with your choices and support.
5
November 11th, 2018
Verified Buyer
Conrad
Greenville PA
Alder wood for GripIt Floorstand
My wife bought a GripIt Floorstand 25 years ago to aid in doing her needlepoint. In moving to a new home we lost some pieces of the ingenious tool, so I decided to replace the lost parts. The GripIt was made from alder wood which would not stain any of the beautiful needlepoint, but regrettably GripIt was no longer available. To the rescue came Woodworkers Source with all the great choices of wood--including alder. Kirk and Lyle were exceptionally helpful in placing my order, even when my email server acted up. The order was packaged very carefully and the precious wood arrived safely. The price was quite reasonable, the wood was beautifully clear (as I requested), and there was ample wood to complete my project. Woodworkers Source is a wonderful resource and I would certainly recommend them.
3
April 21st, 2018
Verified Buyer
artist
Bremerton WA
Not what I asked for
I asked for straight grained wood for use for wood block printing. I got straight grain on the last foot of both ends.

The Joys of Building with Great Woods

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *