Wenge 4/4 Craft Pack: 10 Board Feet of Lumber

Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
Wenge 4/4 Craft Pack: 10 Board Feet

$306.00 /Pack

1-2 $306.00
3+ $275.40 /Pack (10% off)
Tip: mix or match for your best price! Details
Flat Rate U.S. Shipping
$0.00 West of Mississippi River
$10.00 East of Mississippi River
Details


Board Foot Cheat Sheet
Learn How To Estimate Lumber Needs
hardwood lumber sizes
Wenge lumber pack comes with an assortment of widths and lengths.
Here's what you can expect:
13/16" Thickness

Also known as 4/4, S2S.
Surfaced 2 sides (S2S) to 13/16" actual thickness. May still require you to flatten, plane, shape or sand your project parts to fit your project.

Learn more in our blog: "What Does 4/4 Mean in Lumber?"

3" to 8" Widths

This is the range of widths that are usually available in this pack.

  • Price shown is for a random selection of widths within this range
  • Special hand-selection is avaialble at an additional fee, please contact to inquire
  • Edges are rough sawn
  • Straight edge ripping service is available for a small fee

24" to 46" Lengths

You get a variety of lengths with the ends trimmed.

Here's the perfect assortment of boards for your small fine woodworking projects, or when you want to try just a little bit of this wood!
 
A 10 board foot Craft Pack is simple, plus we stand behind it with our 100% satisfaction guarantee. It includes a great mix of boards that total 10 board feet of hand-picked lumber, and you'll get a fantastic assortment of sizes: from 3'' to 8'' wide, and 24'' to 48'' long. All boards come surfaced on 2 sides (S2S) to 13/16'' thick, you can choose to have the boards planed down to a different thickness if you want thin lumber.

About Wenge (Millettia laurentii)

Weight

4.75

lbs /Bd. Ft.
32.68% heavier than red oak (3.58 /bd. ft.)
Hardness

1630

Janka Rating
26.36% harder than red oak (1290 psi)
Density

0.91

Specific Gravity
42.19% more dense than red oak (.64)

General Workability
Average 6/10
Red Oak

Wood Texture
Coarse 8/10
Red Oak

Ease of Finishing
Average 5/10
Red Oak

map of where Wenge tree grows
Wenge is an exotic wood from Africa

An a amazing unique wood that's nearly 100% black. Wenge is also marked with slightly lighter brown streaks which gives the wood an unusual, yet delightful, appearance. Wenge is hard and heavy, and makes a superb accent wood in highly decorative projects.

color of Wenge
Color Range
Dark brown to black with fine black veining.
the Wenge tree
What's The Tree Like?
Ranges from 60-90 feet in height; bole usually straight and unbuttressed; trunk diameters about 36".
other names for Wenge
Other Names
Awoung, Dikela, Mibotu, Bokonge
uses for Wenge
Some Typical Uses
Furniture, cabinets, flooring, industrial, exterior.

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
lumber thickness Lumber Compared
Various lumber thickness as compared to one another
  1. Decide how much board footage you need
  2. Factor in enough to work with! You'll want to arrange grain patterns, sort color, fix mistakes, run test cuts, make finish samples, etc.
  3. Lumber comes in random widths and lengths. If you need special size considerations, please let us know by using the "Minimum Size Request" box in the order form or by confirming your needs by phone or email.
  4. Expect your final amount of footage to change slightly. Buying by the board foot is an exercise in estimation, therefore we don't know the precise amount of footage you'll receive (and be billed for) until we physically select the wood for your order.
  5. We want to get your order right! So we may need to contact you for clarification. Please use a good phone and email during checkout.

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our article if you want the full explanation.

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained

Customer Ratings & Reviews

1
Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
1 Total Reviews
  • 1
July 13, 2012
5 out of 5
Wenge on sale
Review by  Joe from Norman, OK USA
The price was so attractive I bought it on speculation. Absolutely beautiful wood which is a pleasure just to look at. The price was not believable and it certainly seemed like there was more than 10 sq feet. I ordered it with a 10 Sq feet pack of Hickory and should have asked to have it packed separately. Packed together made for a load which I had to leave in the living room until I got help.
Recommended
1 Total Reviews
  • 1
We're Here to Help You Do Your Best Woodworking

You've Gotta Get Our E-Newsletter

Subscribe now and get our woodworking tips delivered weekly, plus get a $10 credit:

Project Help Articles

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Woodworking Tips & Advice Blog

Behind The Scenes w/ Instagram

Gallery of Customer Projects

close