Maple Hard White 4/4 Craft Pack: 10 Board Feet of Lumber

Ratings Snapshot
out of 5
5 (5)
4 (0)
3 (0)
2 (0)
1 (1)
Would recommend this product?
Maple Hard White 4/4 Craft Pack: 10 Board Feet

$109.00 /Pack

1-2 $109.00
3+ $98.10 /Pack (10% off)
Tip: mix or match for your best price! Details
Flat Rate U.S. Shipping
$0.00 West of Mississippi River
$10.00 East of Mississippi River

Board Foot Cheat Sheet
Learn How To Estimate Lumber Needs
hardwood lumber sizes
Hard Maple lumber pack comes with an assortment of widths and lengths.
Here's what you can expect:
13/16" Thickness

Also known as 4/4, S2S.
Surfaced 2 sides (S2S) to 13/16" actual thickness. May still require you to flatten, plane, shape or sand your project parts to fit your project.

Learn more in our blog: "What Does 4/4 Mean in Lumber?"

3" to 8" Widths

This is the range of widths that are usually available in this pack.

  • Price shown is for a random selection of widths within this range
  • Special hand-selection is avaialble at an additional fee, please contact to inquire
  • Edges are rough sawn
  • Straight edge ripping service is available for a small fee

24" to 46" Lengths

You get a variety of lengths with the ends trimmed.

Here's the perfect assortment of boards for your small fine woodworking projects, or when you want to try just a little bit of this wood!
A 10 board foot Craft Pack is simple, plus we stand behind it with our 100% satisfaction guarantee. It includes a great mix of boards that total 10 board feet of hand-picked lumber, and you'll get a fantastic assortment of sizes: from 3'' to 8'' wide, and 24'' to 48'' long. All boards come surfaced on 2 sides (S2S) to 13/16'' thick, you can choose to have the boards planed down to a different thickness if you want thin lumber.
Exotic Wood Sale
Purple Heart 4/4 Lumber
$12.99 $9.74
Exotic Wood Sale
Pearwood 4/4 Lumber (African)
$13.99 $7.99

About Hard Maple (Acer saccharum)



lbs /Bd. Ft.
2.51% heavier than red oak (3.58 /bd. ft.)


Janka Rating
12.40% harder than red oak (1290 psi)


Specific Gravity
6.25% more dense than red oak (.64)

General Workability
Average 5/10
Red Oak

Wood Texture
V. Fine 2/10
Red Oak

Ease of Finishing
Average 6/10
Red Oak

map of where Hard Maple tree grows
Hard Maple is a domestic wood from North America

At least 90% white sapwood. Known for its durability and strength, hence it's common use for flooring, butcher blocks, and large furniture. It has excellent turning properties, a fine & even texture, and a natural luster. Somewhat difficult to work due to high surface hardness. Paints and finishes very well, though.

color of Hard Maple
Color Range
Creamy white to yellowish or pale tan.
the Hard Maple tree
What's The Tree Like?
Produces sweet sap used to make maple syrup. Matures at heights of 90-120 feet with a trunk 24-36".
other names for Hard Maple
Other Names
Hard maple, Rock maple, Sugar maple, White Maple
uses for Hard Maple
Some Typical Uses
Furniture, flooring, cutting boards, butcher blocks, heavy furniture, industrial parts, veneer, inlay, musical instruments, work benches

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
lumber thickness Lumber Compared
Various lumber thickness as compared to one another
  1. Decide how much board footage you need
  2. Factor in enough to work with! You'll want to arrange grain patterns, sort color, fix mistakes, run test cuts, make finish samples, etc.
  3. Lumber comes in random widths and lengths. If you need special size considerations, please let us know by using the "Minimum Size Request" box in the order form or by confirming your needs by phone or email.
  4. Expect your final amount of footage to change slightly. Buying by the board foot is an exercise in estimation, therefore we don't know the precise amount of footage you'll receive (and be billed for) until we physically select the wood for your order.
  5. We want to get your order right! So we may need to contact you for clarification. Please use a good phone and email during checkout.

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our article if you want the full explanation.

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained

Customer Ratings & Reviews

Ratings Snapshot
out of 5
5 (5)
4 (0)
3 (0)
2 (0)
1 (1)
Would recommend this product?
out of 5
5 (5)
4 (0)
3 (0)
2 (0)
1 (1)
Would recommend this product?
6 Total Reviews
  • 1
September 20, 2017
5 out of 5
Great wood
Review by  Jim from Albuquerque, New Mexico
I am very pleased with the maple that I received from Woodworkers Source. I make all sorts of boxes, and this material will work perfectly for that purpose.
Verified Buyer
August 9, 2017
5 out of 5
David Loftis
Review by  Blt from Aledo,Texas
All boards were packaged well and useable. Would not hesitate to order this bundle again. Nice cutting board combined with the walnut
Verified Buyer
August 24, 2012
5 out of 5
Hard Maple
Review by  vos from Marysville, KS USA
The wood was beautiful -- just what I wanted for my turning projects. It contrasts nicely with the other woods I am using.
January 25, 2012
5 out of 5
Exceeds my expectations!
Review by  Doc Wiltbank from snowflake, AZ United States
I bought this product to go with some Purple Heart. Man, the two look great together! Most of my order was 12" width! Just what I needed! I didn't order that width. Not a single thing wrong with this order. Every inch of this wood was not only usuable, but beautiful.
April 5, 2011
5 out of 5
Review by  Carl Huddleson from Parker, Az USA
Very pleased with quality of wood. It was very well pkged and all secured when I recd it. Thanks
February 18, 2011
1 out of 5
Not as good as prior orders, unusable for project
Review by  Michael Halloran from San Jose, CA USA
All my prior Maple orders came in about 8' lengths. My project required that. What I received this time was boards that were less than 4 feet long. Basically just had to store them for use someday down the road and go to a local source and buy the lumber I needed to do my job. I had been very pleased with everything prior to that (3 or 4 orders) and actually gave your info to about 4 contractors that I know as a source for quality lumber. Not really that pleased this time. The lack of certainty about board length and the inability to specify what I need will keep me from ordering from you again in the future. Sorry about the negative feedback but I cant afford to buy lumber in the hope that I may get useful lengths to work with.
Woodworkers Source Responds

Thanks, Michael. To be clear, you can always specify lengths you need when you buy lumber (see here). However, this particular product "Craft Pack" states in the description that the lengths are between 2' and 4'. We can always accommodate your length needs as long as we know what you need.
6 Total Reviews
  • 1
We're Here to Help You Do Your Best Woodworking

You've Gotta Get Our E-Newsletter

Subscribe now and get our woodworking tips delivered weekly, plus get a $10 credit:

Project Help Articles

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Woodworking Tips & Advice Blog

Behind The Scenes w/ Instagram

Gallery of Customer Projects