Purple Heart 4/4 Project Pack: 20 Board Feet of Lumber
Why Choose Purple Heart?
Grain usually straight often with a fine curly figure. Fine texture. Moderately hard to work but takes a glossy, lustrous finish. Lacquer finish will best preserve the color. Also called Amaranth or purpleheart.What's in the Pack?
- 4 to 7 boards
- Assorted widths 4" to 10"
- Most lengths 6'-7'
- May include one piece 48" or longer to fill in to complete the 20 BdFt
| Thickness | 4/4, S2S is 13/16" thick |
| Width | 4" to 10" possible |
| Length* | 4' to 7' possible |
| Grade | Select & Better. |
$318.00
$250.00
/Pack
Sale Ends October 31, 2020
$0.00 West of Mississippi River
$20.00 East of Mississippi River
Details
What to Know about Flat Rate Shipping
In an effort to make buying lumber easy and convenient, we offer these packs with a fixed quanity of lumber. It's your choice of 10, 20 or 100 board feet, and each pack has a flat rate shipping charge if shipped to any location east of the Mississippi River. The charges only apply to the products called Craft Packs, Project Packs and PRO Packs.
Shipping West of Mississippi River: $0.00
- $0.00 for all Craft, Project and PRO packs
- HI and AK excluded.
Shipping East of Mississippi River:
- $10 per 10 BF Craft Pack
- $20 per 20 BF Project Pack
- $50 per 100 BF PRO Pack
About Lumber Sizes & Shipping Length Restrictions
4" to 10" Widths
Price shown is for a random selection of widths within this range. You can request specific widths or add a straight edge rip in the order form.
4' to 7' Lengths
This is the range of lengths that we might have in stock. We always try to ship the longest possible lengths, but to make it easier on you and us, request length ranges in the order form.
13/16" Thickness
Also known as 4/4, S2S. Surfaced 2 sides (S2S) to 13/16" actual thickness. May still require you to flatten, plane, shape or sand your project parts to fit your project..
Learn more in our blog: "What Does 4/4 Mean in Lumber?"
5.02
lbs /Bd. Ft.Wood Texture
Ease of Finishing
Purple Heart is an exotic wood from Latin America
Grain usually straight often with a fine curly figure. Fine texture. Moderately hard to work but takes a glossy, lustrous finish. Lacquer finish will best preserve the color. Also called Amaranth or purpleheart.
Dull gray brown when freshly cut but soon oxidizing to a violet purple.
A tall tree 120 feet or more, producing a long, straight trunk about 36 inches in diameter.
Purpleheart, Amarante, Amaranth, Guarab, Koroboreli, Morado, Nazareno, Palo morado, Pau roxo, Pelo morado, Purperhard, Saka, Sakavalli, Tananeo, Violetwood
Industrial construction, flooring, tool handles, accessories, furniture, cutting boards, musical instruments, picture frames, jewelry, jewelry boxes
Lumber 101: What to Know About Hardwood Lumber
Random WidthsYou will cut and/or glue to create the sizes you need
Surfaced Smooth S2SWe buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
Kiln DriedWe stock kiln dried lumber and store it in a protected warehouse
83%+ ClearUnless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
- Pick a wood you like
- Decide how much you need
- Give us your specs (if you have any)
This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.
Board footage is a measurement of volume, and it's abbreviated Bd. Ft.
One board foot is equal to 144 cubic inches.
It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.
Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.
| Rough Sawn (RGH) | Surfaced (S2S) | |
| 4/4 | ~1" | 13/16" |
| 5/4 | ~1-1/4" | 1-1/16" |
| 6/4 | ~1-1/2" | 1-5/16" |
| 8/4 | ~2" | 1-13/16" |
| 12/4 | ~3" | 2-13/16" |
Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.
Check out our blog for the full explanation.
Lumber ComparedVarious lumber thickness as compared to one another
If you can cut your own pieces to size, here's how we can help:
- Enter requirements into the order form where it says, "Minimum Size Request"
- Tell us what you want to acheive or make
- You will receive wood that can yeild what you need. (You will create the final size)
- We may need to contact you for clarification
You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.
If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.
Hardwood grades explained
- See our FAQs
- Email our friendly crew! helpdesk@woodworkerssource.com
- Call us Toll Free 800-423-2450
Customer Ratings & Reviews
Recommended
Recommended
Recommended
Recommended
Understanding hardwood lumber starts right here with these wacky fractions.
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.
