Leopardwood (Quarter Sawn) 8/4 Lumber Pack: 3 Boards, Choose Your Size

No Reviews Yet | Write a Review
Close this
Add a Headline
What are your comments?
How familiar are you with it?
How would you describe yourself?
(optional)
Only used to notify you about your review
SKU: pack-leo84
Leopardwood (Quarter Sawn) 8/4 Lumber Pack: 3 Boards, Choose Your Size

$269.00 /Pack

Free Shipping
48 U.S. Ground Service
 

Online Exclusive!

Only available online. For in-store purchase check out this similar product instead.

Why Choose Leopardwood?

Flaky, speckled figure with dark flecks, varying from a small lacelike pattern to a larger splashy figure. Texture is fairly coarse. Moderately hard. Works easy, except for a tendency to splinter, and takes a very lustrous finish. Quite scarce timber.

What's in the Pack?

6 boards icon
3 beautiful
hand-selected boards
straight line ripped
Surfaced & straight-line ripped
lumber sizes
Your choice of widths and lengths
straight line ripped
Free ground shipping 48 U.S.

Thickness 8/4, S2S is 1-13/16" thick
Width 5-7", or 7"+
Length 36", 46", or 72"
Quantity 3 Boards
Grade Select & Better (info)
size of lumber
Weight

4.6

lbs /Bd. Ft.
28.49% heavier than red oak (3.58 /bd. ft.)
Hardness

2130

Janka Rating
65.12% harder than red oak (1290 psi)
Density

0.73

Specific Gravity
14.06% more dense than red oak (.64)

General Workability
Somewhat Difficult 7/10
Red Oak

Wood Texture
Average 6/10
Red Oak

Ease of Finishing
Good 3/10
Red Oak

map of where Leopardwood tree grows

(Roupala montana)
Leopardwood grows in Latin America

View All Leopardwood Products

color of Leopardwood
Color Range
Pale pinkish brown to medium brown.
the Leopardwood tree
What's The Tree Like?
Grows up to 150 feet with a trunk diameter of up to 4'.
other names for Leopardwood
Other Names
Leopard, Lacewood, Roupala, Silky Oak
uses for Leopardwood
Some Typical Uses
Boxes, inlay, accessories, fine furniture, veneer, turnery

Lumber 101: What to Know About Hardwood Lumber

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
  1. Pick a wood you like
  2. Decide how much you need
  3. Give us your specs (if you have any)

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our blog for the full explanation.

lumber thickness Lumber Compared
Various lumber thickness as compared to one another

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained
No Reviews Yet! Write a Review

The Joys of Building with Great Woods

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *