Oak White (Flat Sawn) Hardwood Sample (1/2"x3"x6")

Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
Oak White (Flat Sawn) Hardwood Sample (1/2"x3"x6")

$8.00 ea.

Free Shipping
48 U.S., standard ground

Tips & Techniques

Video Tutorial

Learn about woodworking with White Oak (Flat Sawn)

Oak White (Flat Sawn) Hardwood Sample (1/2"x3"x6")

A robust, strong and good looking choice for furniture for sure. White oak has a consistent, creamy light tan color that's not quite found in any other wood. Stains very well, too, if you prefer. White oak is also one of the best domestic hardwoods for exterior/outdoor projects because it resists rot and decay so well.
 
Get your hands on a wood you've never tried before! It's simple. Samples are milled on all sides to the standard size of 1/2'' X 3'' X 6'', as determined by The International Wood Collectors Society, and include the shipping cost within the 48 U.S. Each one is labeled with the botanical and common names. Use these to test finishes and stains, to compare color and grain characteristics, etc.
 
Why Choose White Oak (Flat Sawn)?

A ruggedly handsome wood with saddle-tan color and a humble grain texture that's right at home in projects with unique designs. White oak is tough and especially good for exterior projects.

What Size Is This?
Thickness 1/2"
Width 3"
Length 6"
Grade Samples are milled on all sides, cut square and sanded; wood is a product of nature with inconsistencies from piece to piece. Use species samples as a guide, not a perfect representation.
Approximated, actual size may vary +/- 1/8"

About White Oak (Flat Sawn) (Quercus alba)

Weight

3.92

lbs /Bd. Ft.
9.50% heavier than red oak (3.58 /bd. ft.)
Hardness

1360

Janka Rating
5.43% harder than red oak (1290 psi)
Density

0.68

Specific Gravity
6.25% more dense than red oak (.64)

General Workability
Average 5/10
Red Oak

Wood Texture
Coarse 7/10
Red Oak

Ease of Finishing
Good 4/10
Red Oak

map of where White Oak (Flat Sawn) tree grows
White Oak (Flat Sawn) is a domestic wood from North America

A ruggedly handsome wood with saddle-tan color and a humble grain texture that's right at home in projects with unique designs. White oak is tough and especially good for exterior projects.

color of White Oak (Flat Sawn)
Color Range
Beige to creamy tan.
the White Oak (Flat Sawn) tree
What's The Tree Like?
May reach 100 feet in height and have a trunk of 36" in diameter.
other names for White Oak (Flat Sawn)
Other Names
Arizona oak, Arizona white oak, Cucharillo, Encino, Encino negro, Oak, Roble, Roble amarillo, Roble, colorado, Roble encino, Roblecito, White oak, Stave oak
uses for White Oak (Flat Sawn)
Some Typical Uses
Furniture, outdoor projects, patio furniture, cabinets, flooring, boat building, fences, indoor millwork, moldings, veneer, desks, baseboard

Customer Ratings & Reviews

1
Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
1 Total Reviews
  • 1
June 14, 2012
5 out of 5
Sample
Review by  JM from Limcolm, NE USA
The sample I recieved had a great grain pattern. Definitley a nice wood for some of my projects.
Recommended
1 Total Reviews
  • 1
Videos, Articles, and Project Photos to Help You Do Woodworking
What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *

close