Red Oak (Flat Cut) Paper Back Veneer Sheet - 4' x 8' Roll

Red Oak (Flat Cut) Paper Back Veneer Sheet - 4' x 8' Roll

    $70.00 ea.

    How Do You Want It?
    Ship to My Door Arrives Thu, Jul 16 - Mon, Jul 20
    More Products You'll Like
    These real wood veneer sheets are composed of premium sliced hardwoods that are spliced along the edges to make the full width; splicing is also done in a book matched pattern that's attractive and helps hide the splicing seam. The sheets use full-length slices so there are no splices to make the length. The 10 mil (10 thousandths) thickness paper backing allows the sheet to bend, flex, and work with curves and shapes without splitting. Apply paper back veneers with contact adhesive to make panels of large projects: conference tables, desks, doors, cabinet doors, coffee tables, etc.
    Thickness 1/42" (≈ 1/42" approx)
    Width 48"
    Length 8'
    Quantity One sheet has 32 square feet
    Grade Architectural grade paper back veneer is cut from the cleanest and most attractive logs; all sheets are sanded smooth to 220 grit
    Brand Woodworkers Source
    Size 32 square feet, 4'x8'
    Part # 1438
    Approximated, actual size may vary +/- 1/8"

    Wood Species Guide

    About Red Oak

    Quercus rubra Grows in North America

    View All Red Oak Products
    Native Range
    Map showing where Red Oak grows

    North America

    USA, Canada

    Weight 3.58 lbs / Bd. Ft.
    Hardness 1290 Janka Rating
    Density 0.64 Specific Gravity

    Compare Red Oak with

    Workability
    Easy Difficult
    Texture
    Fine Coarse
    Finishing
    Easy Difficult

    Color Range

    Light tan with a reddish tinge.

    About the Tree

    The most common hardwood in North America. The tree matures at about 70 feet in height and a trunk of 36".

    Other Names

    Northern red oak, Red oak, Gray oak, American red oak, Canadian red oak

    Common Uses

    Furniture, cabinets, floors, accessories, shop jigs, utility projects, interior millwork, molding, mantles, chairs, trim

    2 Review s
    80%
    Overall
    5 star
    0
    3 star
    0
    2 star
    0
    1 star
    0
    Verified Buyer
    Chris
    West Virginia
    4 / 5 December 25th, 2018

    Red Oak (Flat Cut) Paper Back Veneer Sheet on 8' x 3' closet doors

    The veneer is great but I had issues to keep it from bubbling as it dried. I covered a large (8 foot by 3 foot) closet door which is basically hollow. I brushed on Titebond 2 woodglue and rolled the veneer onto it at which point it was smooth and flat. I placed weight on the entire length of the door with unopened boxes of hard wood floor (maybe 35 lbs a box) and on the edges I clamped on pieces of hardwood so the entire edge of the door was clamped tight. After 24 hours I removed the clamps and weight from it. The veneer still looks good but the surface did bubble all over the door - almost like it soaked in the glue as if it got wet. I have 2 more doors to do, any suggestions?
    JZ
    Boston MA USA
    4 / 5 July 30th, 2010

    Oak Veneer Sheet

    It is very good quality and service, except that later I sent you an email asking about what glue to use with the veneer but got no response.

    The Joys of Building with Great Woods

    What's 4/4, 8/4, 12/4, etc.?
    Understanding hardwood lumber starts right here with these wacky fractions.
    Lumber Grades Explained
    If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
    3 Steps To Figure Out How Much Lumber You Need
    Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
    Project Planner Worksheet
    Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
    Understand Wood Toxicity & What You Should Do About It
    Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
    Wood Moves - Here's What You Need to Know
    Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

    Lumber Deals & Woodworking Tips

    SIGN UP NOW to get a $10 coupon!

    Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

    We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.