1/4" Premium Walnut Ply on MDF Core Laser Cutter's Bulk Pack 12"x20"

1/4" Premium Walnut Ply on MDF Core Laser Cutter's Bulk Pack 12"x20"

    $45.00 /Pack

    Free Shipping 48 U.S. Ground Service
    How Do You Want It?
    Ship to My Door Arrives Thu, Nov 26 - Mon, Nov 30

    Description

    Pre-Cut Plywood Fits Your Laser Machine
    It's real walnut veneer applied to MDF so it's just the thing for laser engraving decorative projects! Expect a beautiful premium grade walnut face veneer laminated to an MDF core that's smooth, solid, and stable. For stability purposes, the back side also has a lower grade "mill's choice" veneer (usually birch, maple or oak).

    Laser Cutting & Engraving
    Lasering a walnut sheet with an MDF core produces wonderful projects. MDF is very soft which makes it easy and quick to sand off the dark charred edge left by your laser.
    EPA TSCA Title VI and CARB ATCM 93120 Phase 2 Compliant

    Specifications

    Nominal Thickness
    1/4"
    Actual Thickness
    5.2mm
    Width
    12" ± 1/8" tolerance
    Length
    20" ± 1/2" tolerance
    Quantity
    4, 16, or 64 pieces
    Core Type
    MDF Core
    Formaldehyde
    CARB2 Certified / EPA TSCA Title VI Compliant
    Brand
    Woodworkers Source
    Grade
    Clear Face More info

    Use & Care

    Plywood is stable, versatile, and easy to work with, but proper storage, handling, and cutting techniques help protect the faces, reduce tearout, and improve your finished results.

    Store It Flat and Dry

    Store plywood flat on a level, fully supported surface. Keep it dry and protected from direct sunlight or damp conditions to help prevent bowing, warping, or edge damage.

    Let Panels Acclimate

    Give plywood time to adjust to your shop or project environment before cutting or installation, especially when moving panels between significantly different temperature or humidity conditions.

    Protect the Face Veneer

    Decorative face veneers can be scratched, dented, or chipped. Handle panels carefully, avoid dragging them across rough surfaces, and keep clean material between sheets when stacking.

    Use Sharp Blades and Good Support

    Sharp blades and full support help produce cleaner cuts and reduce tearout. Choose a blade suited for plywood or fine crosscut work, and support the panel securely during cutting.

    Plan for Clean Edges

    Visible edges and crosscuts may need extra care. Proper blade selection, scoring, tape, or backing material can help reduce splintering and chip-out where appearance matters.

    Test Your Finish First

    Test stains, dyes, oils, or clear finishes on an offcut or inconspicuous area before finishing the project. Decorative veneers can respond differently than solid lumber to color and finish products.

    Tip: Inspect the panel before cutting so you can plan around grain direction, face appearance, and the best placement of visible project parts.

    Customer Reviews

    Pages 1   2
    Verified Buyer
    Emily M
    Fayetteville, AR
    I've used it in several projects
    New Woodworker
    1 / 5 May 8th, 2025

    honestly the worst I have used

    Doesn't cut easily in the laser, the veneer also splinters and the glue holding the veneer is very weak. Definitely won't buy again. I use the Columbia Forest and it's much higher quality.
    Woodworkers Source Responds
    Bummer! We can get you a store credit. Navigate to your order to report a problem and it will take you through the steps. https://www.woodworkerssource.com/order_history
    Verified Buyer
    MH
    VA
    I've used it once or twice
    Professional Woodworker
    5 / 5 April 23rd, 2025

    Stellar

    Zero warping, even after engraving detailed designs — super reliable material.
    Verified Buyer
    Jim
    Durango, CO
    I haven't used it yet
    Hobbyist Woodworker
    4 / 5 February 18th, 2025

    Use for laser cutting

    Just arrived. Opened box and they look flat enough. Beautiful walnut, too. If it cuts well I'll be back for more.
    Verified Buyer
    D.L.
    Akron, OH
    I've used it once or twice
    Hobbyist Woodworker
    5 / 5 January 23rd, 2024

    Cut like butter

    Still learning to use my laser, but can't thank you enough for the great material.
    Verified Buyer
    M.Bonds
    CA
    I've used it in several projects
    Enthusiast Woodworker
    5 / 5 June 24th, 2023

    Loved it

    Perfectly smooth and flat — made my laser cuts crisp and clean every time!
    Verified Buyer
    S Smith
    Orlando, FL
    I've used it in a LOT of projects
    Enthusiast Woodworker
    5 / 5 May 9th, 2023

    nice pieces!!

    The walnut veneer looks amazing! Rich color and grain without the hassle of solid wood.
    More Products Woodworkers Like

    Project Inspiration

    Lumber Deals & Woodworking Tips

    SIGN UP NOW to get a $10 coupon!

    Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

    We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.