Granadillo 1/2" Thin Lumber Pack: 6 Boards, 4"+ Widths

Granadillo 1/2" Thin Lumber Pack: 6 Boards, 4"+ Widths
sustainable source lumber

$209.00 /Pack

Free Shipping
48 U.S. Ground Service
 

Online Exclusive!

Only available online. For in-store purchase check out this similar product instead.

About Lumber Sizes & Shipping Length Restrictions

Granadillo lumber packs come with an assortment of widths and lengths. Here's what you can expect.

4"+ Widths

The width above is the minimum width you should expect to receive in this pack. Our lumber is stocked in random widths, so you may receive board 1-3" wider than the width above. You can request a straight edge rip in the order form.

3', 4', or 6' Lengths

This is the range of lengths you can choose from for this pack.

1/2" Thickness

Also known as 1/2, S2S. .
Learn more in our blog: "What Does 4/4 Mean in Lumber?"

A lumber pack is the easiest way to buy some lumber and get building. We stand behind our lumber packs with 100% satisfaction guaranteed. Get your project off to a good start by choosing what length works best for you all with a minimum width of 4". You'll get 6 boards of hand-picked premium lumber that is surfaced on two sides (S2S), kiln dried, and ready to start your project.

About Granadillo (Platymiscium spp)

View All Granadillo Products
Weight

5.25

lbs /Bd. Ft.
46.65% heavier than red oak (3.58 /bd. ft.)
Hardness

2580

Janka Rating
100.00% harder than red oak (1290 psi)
Density

0.84

Specific Gravity
31.25% more dense than red oak (.64)

General Workability
Average 6/10
Red Oak

Wood Texture
V. Fine 2/10
Red Oak

Ease of Finishing
Easy 1/10
Red Oak

map of where Granadillo tree grows
Granadillo is an exotic wood from Latin America

Granadillo will enchant your creativity with its bold purplish color and beautiful rosewood-like patterns. It's a hard wood that will take an ultra-fine polish and will steal the show in your decorative projects.

color of Granadillo
Color Range
Dark brown to red to orange to purple
the Granadillo tree
What's The Tree Like?
These trees are reported to reach heights of 80 feet with trunk diameters of 29-42". The buttressed trees develop straight and well-formed boles, that are often clear to 60 feet.
other names for Granadillo
Other Names
Coyote, Cocobolo, Granadillo, Guayacan trebol, Jacaranda do brejo, Koenatepi, Macacauba, Macawood, Trebal, Trebol
uses for Granadillo
Some Typical Uses
Pool cues, musical instruments, inlay, turnings, veneer

Lumber 101: What to Know About Hardwood Lumber

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
  1. Pick a wood you like
  2. Decide how much you need
  3. Give us your specs (if you have any)

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our blog for the full explanation.

lumber thickness Lumber Compared
Various lumber thickness as compared to one another

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained

Customer Ratings & Reviews

Be the first to rate this item!

Write Review

Videos, Articles, and Project Photos to Help You Do Woodworking
What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *