1/2" Genuine Mahogany Thin Lumber Pack - Select Count & Size
$70.00 /Pack
48 U.S. Ground Service
Why Choose Genuine Mahogany?
Elevate your woodworking with the luxurious, reddish-brown hues and fine, straight grain of genuine mahogany. Effortless to machine, carve, and sand, plus it’s ideal for heirloom-quality furniture and gorgeous accent projects.What's in the Pack?
beautiful
hand-selected boards
Surfaced & straight-line ripped
Your choice of widths and lengths
Free ground shipping 48 U.S.
| Thickness | 1/2", S2S is 1/2" thick |
| Width | |
| Length | 36", 46", or 72" |
| Quantity | 6 Boards |
| Grade | Select & Better (info) |
About Lumber Sizes & Shipping Length Restrictions
Widths
We're here to help you build a successful project. Choose what works for you.
36", 46", or 72" Lengths
This is the range of lengths you can choose from for this pack.
1/2" Thickness
Also known as 1/2", S2S. This means the boards you'll receive will be surfaced on 2 sides (S2S) to 1/2" actual thickness.
Learn more in our blog: "What Does 4/4 Mean in Lumber?"
2.58
lbs /Bd. Ft.Wood Texture
Ease of Finishing
Yellowish brown to reddish or orange brown.
A massive tree with a beautiful canopy, this tree grows to over 150 feet with trunk diameter over 72" above large buttresses.
Acajou, Acajou Amerique, Aguano, Belize mahogany, Big leafed mahogany, Bigleaf mahogany, Caguano, Cao, Caoba, Caoba de Atlantico, Caobilla, Chiculte, Cobano, Gateado, Honduras mahogany, Mahogany, Mara
Furniture, cabinets, guitars and other musical instruments, interiors, boat building, pattern making, trim, entry doors, stairs.
What Does The Janka Hardness Rating Mean?
The Janka hardness test is the international standard for measuring the resistance of a sample of wood to denting and wear.
It's expressed in psi, or pounds-per-square-inch. The test measures the pressure required to embed an 11.28mm (.444 in) diameter steel ball into wood to half the ball's diameter. The measurement was developed to determine whether a species is suitable for use as flooring; however, we include it here and compare it to the rating of red oak to help you make a buying choice.
There is a difference between hardness and being difficult to work with. Generally speaking, the harder the wood the easier it is to finish and polish. Harder woods create good, solid long-lasting joinery in furniture.
The hardness of wood varies with the direction of the wood grain, and varies from piece to piece. So a Janka rating is an average of numerous tests performed on all directions and numerous pieces. Use the Janka hardness rating as guide, not a definitive answer.
Image by Nasa-verve, Wikimedia Commons
Lumber 101: What to Know About Hardwood Lumber
Random WidthsYou will cut and/or glue to create the sizes you need
Surfaced Smooth S2SWe buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
Kiln DriedWe stock kiln dried lumber and store it in a protected warehouse
83%+ ClearUnless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
- Pick a wood you like
- Decide how much you need
- Give us your specs (if you have any)
This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.
Board footage is a measurement of volume, and it's abbreviated Bd. Ft.
One board foot is equal to 144 cubic inches.
It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.
Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.
| Rough Sawn (RGH) | Surfaced (S2S) | |
| 4/4 | ~1" | 13/16" |
| 5/4 | ~1-1/4" | 1-1/16" |
| 6/4 | ~1-1/2" | 1-5/16" |
| 8/4 | ~2" | 1-13/16" |
| 12/4 | ~3" | 2-13/16" |
Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.
Check out our blog for the full explanation.
Lumber ComparedVarious lumber thickness as compared to one another
If you can cut your own pieces to size, here's how we can help:
- Enter requirements into the order form where it says, "Minimum Size Request"
- Tell us what you want to acheive or make
- You will receive wood that can yeild what you need. (You will create the final size)
- We may need to contact you for clarification
You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.
If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.
Hardwood grades explained
- See our FAQs
- Email our friendly crew! [email protected]
- Call us Toll Free 800-423-2450
Great wood!
Mahogany Lumer Pack
Music to my eyes
First time purchaser
Great selection
Mahogany
The Joys of Building with Great Woods
Understanding hardwood lumber starts right here with these wacky fractions.
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.
