White Oak (Flat Sawn) 1/2" Thin Lumber Pack: 6 Boards, Choose Your Size
$99.00 /Pack
48 U.S. Ground Service
Delivery & Pick-Up Options
Log in to see delivery dates
Ready NEXT DAY - Tempe, Phoenix or Tucson
Schedule it during checkout
Why Choose White Oak?
A ruggedly handsome wood with saddle-tan color and a humble grain texture that's right at home in projects with unique designs. White oak is tough and especially good for exterior projects.What's in the Pack?
6 beautiful
hand-selected boards
Surfaced & straight-line ripped
Your choice of widths and lengths
Free ground shipping 48 U.S.
| Thickness | 1/2, S2S is 1/2" thick |
| Width | 3-5" or 5-7" |
| Length | 36", 46", or 72" |
| Quantity | 6 Boards |
| Grade | Select & Better (info) |
3.92
lbs /Bd. Ft.Wood Texture
Ease of Finishing
Beige to creamy tan.
May reach 100 feet in height and have a trunk of 36" in diameter.
Arizona oak, Arizona white oak, Cucharillo, Encino, Encino negro, Oak, Roble, Roble amarillo, Roble, colorado, Roble encino, Roblecito, White oak, Stave oak
Furniture, outdoor projects, patio furniture, cabinets, flooring, boat building, fences, indoor millwork, moldings, veneer, desks, baseboard
What Does The Janka Hardness Rating Mean?
The Janka hardness test is the international standard for measuring the resistance of a sample of wood to denting and wear.
It's expressed in psi, or pounds-per-square-inch. The test measures the pressure required to embed an 11.28mm (.444 in) diameter steel ball into wood to half the ball's diameter. The measurement was developed to determine whether a species is suitable for use as flooring; however, we include it here and compare it to the rating of red oak to help you make a buying choice.
There is a difference between hardness and being difficult to work with. Generally speaking, the harder the wood the easier it is to finish and polish. Harder woods create good, solid long-lasting joinery in furniture.
The hardness of wood varies with the direction of the wood grain, and varies from piece to piece. So a Janka rating is an average of numerous tests performed on all directions and numerous pieces. Use the Janka hardness rating as guide, not a definitive answer.
Image by Nasa-verve, Wikimedia Commons
Lumber 101: What to Know About Hardwood Lumber
Random WidthsYou will cut and/or glue to create the sizes you need
Surfaced Smooth S2SWe buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
Kiln DriedWe stock kiln dried lumber and store it in a protected warehouse
83%+ ClearUnless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
- Pick a wood you like
- Decide how much you need
- Give us your specs (if you have any)
This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.
Board footage is a measurement of volume, and it's abbreviated Bd. Ft.
One board foot is equal to 144 cubic inches.
It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.
Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.
| Rough Sawn (RGH) | Surfaced (S2S) | |
| 4/4 | ~1" | 13/16" |
| 5/4 | ~1-1/4" | 1-1/16" |
| 6/4 | ~1-1/2" | 1-5/16" |
| 8/4 | ~2" | 1-13/16" |
| 12/4 | ~3" | 2-13/16" |
Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.
Check out our blog for the full explanation.
Lumber ComparedVarious lumber thickness as compared to one another
If you can cut your own pieces to size, here's how we can help:
- Enter requirements into the order form where it says, "Minimum Size Request"
- Tell us what you want to acheive or make
- You will receive wood that can yeild what you need. (You will create the final size)
- We may need to contact you for clarification
You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.
If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.
Hardwood grades explained
- See our FAQs
- Email our friendly crew! [email protected]
- Call us Toll Free 800-423-2450
The Joys of Building with Great Woods
Understanding hardwood lumber starts right here with these wacky fractions.
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.
