Classic Cutting Board Kit - Maple, Cherry & Walnut

Classic Cutting Board Kit - Maple, Cherry & Walnut
    On Sale

    $99.00   $89.10 /Kit

    Sale Savings! $9.90
    Sale Ends 2026-11-30
    Free Shipping 48 U.S. Ground Service
    How Do You Want It?
    Ship to My Door Arrives Thu, Nov 26 - Mon, Nov 30
    • Fine American hardwood
    • Ready to use
    • Choose a mix

    Description

    This ensemble of beautiful American hardwood invites you to craft a culinary masterpiece that harmonizes the deep richness of walnut, the gentle elegance of maple, and the vibrant allure of cherry.

    You get enough wood to make one large cutting board (approx: 1"x13"x18" arranged on edge) or cut them to suit your imagination.

    Kit includes 18 pre-sized cuting board strips 3/4"x1-3/4"x18", and you choose your assortment

    Specifications

    Nominal Thickness
    13/16"
    Actual Thickness
    13/16"
    Width
    1-3/4" ± 1/8" tolerance
    Length
    18" ± 1/2" tolerance
    Quantity
    18 pieces

    Use & Care

    Cutting board kits make the project easier by taking care of much of the material preparation up front. For the best results, take a little time to plan your layout, glue carefully, and finish the board with its intended use in mind.

    Plan Your Layout First

    Arrange the pieces before applying glue so you can balance grain, color, and contrast. Once you find a pattern you like, mark the sequence or orientation before disassembling it for glue-up.

    Dry-Fit the Assembly

    Bring all of the parts together without glue and make sure the joints close cleanly. Check the overall size, alignment, and clamp setup before you start the glue-up.

    Use the Right Wood Glue

    Apply glue evenly across the mating surfaces and follow the adhesive manufacturer's recommendations for open time, clamping time, temperature, and cleanup.

    Clamp Evenly and Keep It Flat

    Use enough pressure to close the joints without forcing the panel out of alignment. Check the assembly during clamping and use cauls or other aids when helpful to keep the board as flat as possible.

    Flatten and Sand After the Glue Cures

    Allow the adhesive to cure fully before scraping, flattening, or sanding the board. Work through your sanding grits consistently and soften sharp edges before applying finish.

    Finish for the Intended Use

    Choose a finish appropriate for the way the completed board will be used. For food-contact surfaces, use products intended for that application and follow the finish manufacturer's directions for application and cure time.

    After the project is finished: Do not leave a solid wood cutting board soaking in water or place it in a dishwasher. Clean it promptly, allow it to dry thoroughly, and maintain the finish as needed.

    Customer Reviews

    Pages 1   2   3   4   5
    Verified Buyer
    Tony C
    Peoria, AZ
    I've used it once or twice
    New Woodworker
    3 / 5 November 13th, 2024

    Widths too variable

    I liked the sale, ordering 5 or 6 kits, over a month’s time, plus extra strips. I was relying on the described dimensions to be accurate. Not so. Lengths and thicknesses not a problem. But, the widths of 1 3/4” were anywhere from 1 13/16” to less than 1 11/16”; the cherry strips, especially, were all undersized. Since I don’t have a planer, I had to rely on my benchtop jointer to make everything uniform beforehand…a lot of needless work.
    Verified Buyer
    2hokies
    Virginia
    I haven't used it yet
    5 / 5 December 9th, 2020

    Great first experience

    This was my first time using Woodworkers Source and it was a great experience. I'm still pretty new to woodworking and, heretofore, most of my wood was purchased from big box stores. So, when I open a box of wood where all of the boards are not warped and have a good edge to cut on, it was amazing! Everything included was as promised, the boards were clean and straight, and there was enough to craft 2 or 3 cutting boards. \n\nPlus, the commentary at the bottom of the shipping notice was hilarious! I've saved that and shared with many others! \n\nI will definitely be a repeat customer!
    Verified Buyer
    2hokies
    Virginia
    I haven't used it yet
    5 / 5 December 9th, 2020

    Great first experience

    This was my first time using Woodworkers Source and it was a great experience. I'm still pretty new to woodworking and, heretofore, most of my wood was purchased from big box stores. So, when I open a box of wood where all of the boards are not warped and have a good edge to cut on, it was amazing! Everything included was as promised, the boards were clean and straight, and there was enough to craft 2 or 3 cutting boards. Plus, the commentary at the bottom of the shipping notice was hilarious! I've saved that and shared with many others! I will definitely be a repeat customer!
    Verified Buyer
    Ed
    Severn Maryland
    4 / 5 December 4th, 2020

    butcher black

    the wood was just ok some were cup and a few had bug wholes that right in the size that I was planning to use...lol that's just bad luck, but the first order I received some months ago was outstanding .
    Verified Buyer
    Chris
    NM
    5 / 5 November 25th, 2020

    Cutting board kit

    The wood is beautiful. I will be purchasing for you again in the future
    Verified Buyer
    Terence
    Williston Park NY
    5 / 5 November 16th, 2020

    Excellent Kit

    Fantastic kit! Made a 12x16 board and with the the leftovers made a pair of small serving boards as well. Wood were excellent choices with great edges, making this a breeze to rip and glue up.
    More Products Woodworkers Like

    Project Inspiration

    Lumber Deals & Woodworking Tips

    SIGN UP NOW to get a $10 coupon!

    Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

    We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.