Iroko 8/4 Lumber

Close this
Add a Headline
What are your comments?
How familiar are you with it?
How would you describe yourself?
(optional)
Only used to notify you about your review
Iroko 8/4 Lumber

$13.99 /Board Feet

1-99 $13.99 /Bd. Ft.
100+ $10.49 /Bd. Ft. (25% off)
Tip: mix or match for your best price! Details
  1. Enter your finished dimensions
  2. Tap "Add to List"
  3. Repeat for as many sizes as you need
  4. Add to cart when you're ready
Running Total:
We recommend Bd. Ft. to yield your sizes for a net Bd. Ft.
How do you want your lumber?

Size Requirements?
Order by Size
 

Local Store Pick-Up May Be Available

Call to Reserve
Tempe
Tucson
Phoenix

About Lumber Sizes & Shipping Length Restrictions

Iroko / African Teak lumber comes in random sizes. Here's what you can expect.

4" to 10" Widths

Price shown is for a random selection of widths within this range. You can request specific widths or add a straight edge rip in the order form.

6' to 12' Lengths

This is the range of lengths that we might have in stock. The length you receive depends on how much you order.

Length Shipping Restrictions
84" (7') long max
We always try to ship the longest lengths possible.
8' to 12' long is possible
8' and longer can be shipped truck freight, but this method is usually economical only for shipments that are at least 450 lbs (approx 100-150 board feet depending on the wood).

1-13/16" Thickness

Also known as 8/4, S2S. Surfaced 2 sides (S2S) from rough sawn lumber. You should be able to yield approximately 1-3/4" thickness after you flatten, plane, shape or sand your project parts to fit your project.
Learn more in our blog: "What Does 4/4 Mean in Lumber?"

How Lumber Ordering Works

1

Decide how much you need in Board Feet. Best way to get help with this is to use our Project Planner worksheet

2

Consider how much extra you want for arranging grain or color, fixing mistakes, testing cut set ups or finishes.

3

Choose your size requirements, if you have any, in the order form.

About Iroko / African Teak (Chlorophora excelsa)

View All Iroko / African Teak Products
Weight

4.08

lbs /Bd. Ft.
13.97% heavier than red oak (3.58 /bd. ft.)
Hardness

1540

Janka Rating
19.38% harder than red oak (1290 psi)
Density

0.78

Specific Gravity
21.88% more dense than red oak (.64)

General Workability
Good 4/10
Red Oak

Wood Texture
Average 5/10
Red Oak

Ease of Finishing
Average 5/10
Red Oak

map of where Iroko / African Teak tree grows
Iroko / African Teak is an exotic wood from Africa

Iroko offers superb weathering properties and a wonderful earthy burnished-brown color. Consider it the best alternative to high-priced teak. Medium to coarse texture with an interlocking grain that often produces interesting patterns. Open pores could be filled for a smooth finish, or left alone for a natural texture. Expect the wood to work easily with both power and hand tools.

color of Iroko / African Teak
Color Range
Color varies from pale golden brown to dark chocolate brown.
the Iroko / African Teak tree
What's The Tree Like?
The tree is quite large and may reach 160 feet in height. The bole is straight, cylindrical, and may be clear of branches to 80 feet. Logs usually average about 30" diameter.
other names for Iroko / African Teak
Other Names
African Teak, Moreira, Abang, Doussie, Mvule, Iroko, Mvuli, Kambala, Odum
uses for Iroko / African Teak
Some Typical Uses
Boat building and marine work, furniture and cabinet work.

Lumber 101: What to Know About Hardwood Lumber

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
  1. Pick a wood you like
  2. Decide how much you need
  3. Give us your specs (if you have any)

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our blog for the full explanation.

lumber thickness Lumber Compared
Various lumber thickness as compared to one another

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained
4 Reviews
95%
Overall
3 star
0
2 star
0
1 star
0
5
October 31st, 2019
Verified Buyer
Bob
N.Y.
Iroko 8/4 Lumber
Price was great, wood is very nice , fast shipping will be doing more business with them
5
August 12th, 2018
Verified Buyer
David Smith
Pasco WA
Semi-Professional Woodworker
Promo and Red Grandis
Wood looks good but I haven't used it yet.
4
March 25th, 2010
T. H.
Lincoln NE
Pretty good
Pretty good stuff. I like the way it cuts and sands, but it does have a strong odor when you cut it. Not terrible just strong. Going to look great for a couple of patio tables!
5
April 2nd, 2009
Denny Lewis
Portland ME US
Spectacular
I really like Iroko. Used it in a commissioned conference table last year. Worked perfectly, IMO. Use at least a dust mask, although you should with any wood you use.
Videos, Articles, and Project Photos to Help You Do Woodworking
What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *