1/16" Cherry Veneer Pack

No Reviews Yet | Write a Review
1/16" Cherry Veneer Pack

    $20.99 /Pack

    How Do You Want It?
    Ship to My Door Arrives Fri, Nov 27 - Tue, Dec 1

    Description

    This craft veneer pack contains 3-4 sheets of raw, unbacked wood veneer that have been sanded as well as trimmed on the edges and ends. The sheets are sequence sliced so you can match them for a variety of projects such as: Furniture repair, Game boards, Boxes, and much more. Each piece measures 1/16'' x 4.5-7.5'' x 24".

    Specifications

    Nominal Thickness
    1/16"
    Actual Thickness
    1/16"
    Width
    4-1/2" to 7-1/2" ± 1/8" tolerance
    Length
    24" ± 1/2" tolerance
    Quantity
    3-4 sheets per pack
    Grade
    This raw veneer is clear, un-backed, and trimmed clean on all sides More info
    Size
    4.5-7.5" x 24", 4 pieces, 3 square feet

    What to Know About This Wood

    Cherry is one of those woods that gets better with time. Freshly cut, planed, routed, or sanded cherry can look surprisingly pale—even if the board looked beautifully oxidized when you bought it. That's normal. Exposure to air and mild UV light gradually develops the warm rusty, russet-brown color cherry is known for.

    The simplest and most reliable approach is to let the color develop naturally. A few days of mild UV exposure can get things moving, while the color will continue to mature over the next 6–8 months. Avoid prolonged direct sunlight, which can eventually bleach the wood rather than improve the color. Home-brew aging methods using baking soda, lye, or similar treatments exist, but they require testing and can produce unpredictable results.

    In the shop, cherry is a pleasure to work. It's medium-dense, tight-grained, and sits in a sweet spot between too soft and too hard. It cuts, routes, planes, and sands easily with sharp carbide tooling and generally doesn't splinter much. The big exception is burning: cherry can develop dark blade marks quickly if your feed rate slows down or stops during a cut. Keep the workpiece moving consistently through the saw or router.

    Use & Care

    Wood veneer gives you the color, grain, and character of real wood in a thin, flexible format. Careful handling, good substrate preparation, and the right adhesive method will make the biggest difference in your finished result.

    Store It Flat and Protected

    Keep veneer dry, clean, and protected from direct sunlight or extreme humidity changes. Store sheets flat whenever possible and avoid folding, creasing, or placing heavy objects directly on the face.

    Start With a Smooth Substrate

    The surface underneath the veneer should be flat, clean, dry, and free of dust, bumps, or loose material. Small imperfections in the substrate can telegraph through the veneer after it is applied.

    Plan the Grain Before Cutting

    Lay out the veneer before trimming so you can choose the best grain direction, color, and figure for the project. When matching multiple pieces, take time to arrange the pattern before applying adhesive.

    Use the Right Adhesive Method

    Adhesive choice and application method depend on the veneer type, backing, substrate, and project. Follow the adhesive manufacturer's instructions and make sure the products you use are compatible with your veneer.

    Apply Consistent Pressure

    Good contact between the veneer and substrate is essential. Use the pressing, rolling, clamping, or vacuum method appropriate for your adhesive system so the veneer bonds evenly without trapped air or loose areas.

    Trim and Sand Carefully

    Veneer is thin, so use sharp tools and light sanding pressure when trimming or preparing the surface for finish. Avoid aggressive sanding that can cut through the face and expose the substrate underneath.

    Tip: Always test your adhesive, pressing method, and finish on scrap material when possible. Veneer type and backing can affect how the material behaves during application and finishing.

    Customer Reviews

    No Reviews Yet! Write a Review
    More Products Woodworkers Like

    Project Inspiration

    Lumber Deals & Woodworking Tips

    SIGN UP NOW to get a $10 coupon!

    Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

    We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.