Exterior Marine Grade Plywood Project Panel 8"x12"

Exterior Marine Grade Plywood Project Panel 8"x12"

    $8.00 ea.

    Free Shipping for 5+ mix or match (48 U.S. Ground)
    How Do You Want It?
    Ship to My Door Arrives Fri, Nov 27 - Tue, Dec 1
    Ready-to-Build Project Panels
    Premium plywood and hardwood panels pre-cut to size—perfect for CNC projects, laser cutting, prototypes, jigs, signs, crafts, and small woodworking projects.

    Description

    Here's an awesome plywood for projects that need the best protection:
    • Assembled with tough Type 1 Phenolic exterior adhesive 
    • 9 hardwood inner plies hold screws very well
    • Accepts all wood glues
    • Plain, light colored face veneers are free of pin knots
    • Resists rot, fungus, weather, micro-organisms, cold and boiling water, steam and dry heat
    Manufactured to British Standard BS 1088, which makes it one of the best plywoods for your projects where moisture is a concern. Plus, it's reassuring and satisfying to build with because it's tough, solid, and made with the highest standards and strict tolerances.

    Specifications

    Nominal Thickness
    1/2" or 3/4"
    Actual Thickness
    12mm or 18mm
    Width
    8" ± 1/8" tolerance
    Length
    12" ± 1/2" tolerance
    Core Type
    Veneer Ply Core
    Adhesive
    Exterior rated
    Finish
    Raw Unfinished
    Formaldehyde
    CARB2 Certified / EPA TSCA Title VI Compliant
    Brand
    Woodworkers Source
    Size
    8" x 12"
    Exterior Marine Grade Plywood Project Panel 8"x12"

    Use & Care

    Plywood is stable, versatile, and easy to work with, but proper storage, handling, and cutting techniques help protect the faces, reduce tearout, and improve your finished results.

    Store It Flat and Dry

    Store plywood flat on a level, fully supported surface. Keep it dry and protected from direct sunlight or damp conditions to help prevent bowing, warping, or edge damage.

    Let Panels Acclimate

    Give plywood time to adjust to your shop or project environment before cutting or installation, especially when moving panels between significantly different temperature or humidity conditions.

    Protect the Face Veneer

    Decorative face veneers can be scratched, dented, or chipped. Handle panels carefully, avoid dragging them across rough surfaces, and keep clean material between sheets when stacking.

    Use Sharp Blades and Good Support

    Sharp blades and full support help produce cleaner cuts and reduce tearout. Choose a blade suited for plywood or fine crosscut work, and support the panel securely during cutting.

    Plan for Clean Edges

    Visible edges and crosscuts may need extra care. Proper blade selection, scoring, tape, or backing material can help reduce splintering and chip-out where appearance matters.

    Test Your Finish First

    Test stains, dyes, oils, or clear finishes on an offcut or inconspicuous area before finishing the project. Decorative veneers can respond differently than solid lumber to color and finish products.

    Tip: Inspect the panel before cutting so you can plan around grain direction, face appearance, and the best placement of visible project parts.

    Customer Reviews

    1 Review
    100%
    Overall Rating
    4 star
    0
    3 star
    0
    2 star
    0
    1 star
    0
    Verified Buyer
    SAM
    NJ coast
    I've used it once or twice
    Hobbyist Woodworker
    5 / 5 November 11th, 2025

    good for Grumman canoe transom

    I needed to replace the rotted motor mount boards on my 1973 Grumman square stern canoe. I paid >$65 for Marathon's "OEM replacements", which were smaller, full of voids, and generally low quality; far inferior to the originals. These samples are large enough for 2 of them (I used 1 ea 12mm inside & 1 ea 18mm outside) to be cut for replacements, and can be easily painted (or varnished). if needed The outside board is about 1/4" shorter than the original, but still larger than what Marathon sent me. Much better quality than the alleged OEM replacements at less than 20% of the price :-)
    More Products Woodworkers Like

    Project Inspiration

    Lumber Deals & Woodworking Tips

    SIGN UP NOW to get a $10 coupon!

    Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

    We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.