Mesquite 8/4 Lumber

Close this
Add a Headline
What are your comments?
How familiar are you with it?
How would you describe yourself?
(optional)
Only used to notify you about your review
SKU: mes84
Mesquite 8/4 Lumber

$21.99 /Board Feet

1-99 $21.99 /Bd. Ft.
100+ $16.49 /Bd. Ft. (25% off)
Tip: mix or match for your best price! Details

Enter the sizes you'd like to end up with and add to cart when ready!

How do you want your lumber?
Running Total:
This is what it will cost to yield the sizes you'd like to end up with.

 

Local Store Pick-Up May Be Available

Call to Reserve
Tempe
Tucson
Phoenix

About Lumber Sizes & Shipping Length Restrictions

4" to 6" Widths

Price shown is for a random selection of widths within this range. You can request specific widths or add a straight edge rip in the order form.

2' to 6' Lengths

This is the range of lengths that we might have in stock. The length you receive depends on how much you order.

Length Shipping Restrictions
84" (7') long max
We always try to ship the longest lengths possible.
8' to 12' long is possible
8' and longer can be shipped truck freight, but this method is usually economical only for shipments that are at least 450 lbs (approx 100-150 board feet depending on the wood).

1-13/16" Thickness

Also known as 8/4, S2S. Surfaced 2 sides (S2S) from rough sawn lumber. You should be able to yield approximately 1-3/4" thickness after you flatten, plane, shape or sand your project parts to fit your project.
Learn more in our blog: "What Does 4/4 Mean in Lumber?"

How Lumber Ordering Works

1

Decide how much you need in Board Feet. Best way to get help with this is to use our Project Planner worksheet

2

Consider how much extra you want for arranging grain or color, fixing mistakes, testing cut set ups or finishes.

3

Choose your size requirements, if you have any, in the order form.

Weight

4

lbs /Bd. Ft.
11.73% heavier than red oak (3.58 /bd. ft.)
Hardness

2299

Janka Rating
78.22% harder than red oak (1290 psi)
Density

0.64

Specific Gravity
Same as red oak (.64)

General Workability
Somewhat Difficult 8/10
Red Oak

Wood Texture
Fine 3/10
Red Oak

Ease of Finishing
Good 3/10
Red Oak

map of where Mesquite tree grows

(Prosopis juliflora)
Mesquite grows in North America

View All Mesquite Products

color of Mesquite
Color Range
Rich dark brown heartwood with wavy darker lines.
the Mesquite tree
What's The Tree Like?
This is a small, twisted, short-trunked tree, 20 to 50 feet high, or a large shrub. It is very slow growing, ill-shaped and scrawny looking tree with an exceptionally deep tap root.
other names for Mesquite
Other Names
Honey Mesquite, Argentine Mesquite
uses for Mesquite
Some Typical Uses
Furniture, flooring, cabinetry, fine art, turnings

Lumber 101: What to Know About Hardwood Lumber

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
  1. Pick a wood you like
  2. Decide how much you need
  3. Give us your specs (if you have any)

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our blog for the full explanation.

lumber thickness Lumber Compared
Various lumber thickness as compared to one another

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained
2 Reviews
60%
Overall
4 star
0
3 star
0
2 star
0
5 / 5
May 20th, 2020
Jim
Mesquite Nevada
Great character
Despite the stressed spots in the wood, it gave my table legs the rough look that I was expecting. I used epoxy to fill in the cracks in the wood to strengthened the wood.
1 / 5
November 1st, 2019
Verified Buyer
Bob
n/a
New Woodworker
Mesquite 8/4 lumber
Very disappointed in this lumber. Contained major cracks and checks which renders the lumber useless for intended purpose (cutting boards).
Familiarity: I haven't used it yet
Woodworkers Source Responds
We're sorry if it wasn't clear that mesquite does contain a lot of that. Customer service will contact you today about replacing it with a different choice.

The Joys of Building with Great Woods

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *