1/4" (5.2mm) Premium Walnut Plywood on MDF Core Full Size 4'x8'— Store Pickup

1/4" (5.2mm) Premium Walnut Plywood on MDF Core Full Size 4'x8'— Store Pickup

    $79.00 /Sheet

    AZ Store Pickup Only Choose a time during checkout
    How Do You Want It?
    Ship to My Door Full sheets exceed carrier size limits
    Shipping isn’t available for full 4'x8' sheets.
    This item exceeds UPS/FedEx size limits and is available for Arizona pickup only. Need it shipped? Choose a shipping-friendly pre-cut panel.
    Code: 1010.SG.4070_pack
    Price: $114.99
    Supply is limited, so order today.
    Quantity in Basket: none
    • Cabinet grade
    • Flat MDF core

    Description

    Specifications

    Nominal Thickness
    1/4"
    Actual Thickness
    5.2mm
    Width
    48" ± 1/8" tolerance
    Length
    96" ± 1/2" tolerance
    Quantity
    32 square feet per sheet
    Core Type
    MDF Core
    Adhesive
    Interior rated
    Appearance
    Premium Cabinet Grade
    Finish
    Raw Unfinished
    Formaldehyde
    CARB2 Certified / EPA TSCA Title VI Compliant
    Brand
    Woodworkers Source
    Grade
    Cabinet Grade More info
    Size
    Full sheet, 4'x8'

    Use & Care

    Plywood is stable, versatile, and easy to work with, but proper storage, handling, and cutting techniques help protect the faces, reduce tearout, and improve your finished results.

    Store It Flat and Dry

    Store plywood flat on a level, fully supported surface. Keep it dry and protected from direct sunlight or damp conditions to help prevent bowing, warping, or edge damage.

    Let Panels Acclimate

    Give plywood time to adjust to your shop or project environment before cutting or installation, especially when moving panels between significantly different temperature or humidity conditions.

    Protect the Face Veneer

    Decorative face veneers can be scratched, dented, or chipped. Handle panels carefully, avoid dragging them across rough surfaces, and keep clean material between sheets when stacking.

    Use Sharp Blades and Good Support

    Sharp blades and full support help produce cleaner cuts and reduce tearout. Choose a blade suited for plywood or fine crosscut work, and support the panel securely during cutting.

    Plan for Clean Edges

    Visible edges and crosscuts may need extra care. Proper blade selection, scoring, tape, or backing material can help reduce splintering and chip-out where appearance matters.

    Test Your Finish First

    Test stains, dyes, oils, or clear finishes on an offcut or inconspicuous area before finishing the project. Decorative veneers can respond differently than solid lumber to color and finish products.

    Tip: Inspect the panel before cutting so you can plan around grain direction, face appearance, and the best placement of visible project parts.

    Customer Reviews

    5 Reviews
    88%
    Overall Rating
    4 star
    0
    3 star
    0
    1 star
    0
    Verified Buyer
    n/a
    n/a
    5 / 5 April 22nd, 2021

    Premium Walnut Plywood 1/4" G1S on MDF Core - 2'x4'

    Very pleased with product and service
    Verified Buyer
    n/a
    n/a
    5 / 5 April 22nd, 2021

    Premium Walnut Plywood 1/4" G1S on MDF Core - 2'x4'

    Very pleased with order
    Verified Buyer
    Eric
    CA
    5 / 5 February 17th, 2021

    Great product.

    Great product and packed nicely no dings on the corners or edges.
    n/a
    n/a
    2 / 5 May 26th, 2020

    Thin Veneer

    Overall I am surprised at the quality of this plywood. The veneer is incredibly thin and shows through with the slightest touch. If durability is a concern I would not recommend this product. The sheet I had measured an average of .190", well below the "actual" 5.2mm(.205") and a comical 75% of 1/4". While the appearance is good on first inspection I would not use this product again due to the fragile veneer.
    Woodworkers Source Responds
    So sorry to hear this. Customer service will contact you about a replacement.
    Verified Buyer
    BobW
    n/a
    5 / 5 September 13th, 2019

    Wood shipment

    Received some 2x4 ply of different species on time in great shape.
    More Products Woodworkers Like

    Project Inspiration

    Lumber Deals & Woodworking Tips

    SIGN UP NOW to get a $10 coupon!

    Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

    We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.