1-3/4" African Mahogany Pre-Cut Squares
$8.00 ea.
mix/match strips and squares (48 U.S. Ground)
Description
Get ready to work with the finest wood squares you've ever seen, they're ready to be turned into whatever you can imagine, such as furniture parts, table legs, small accessories, handles, artwork and other fine woodworking projects.Specifications
Use & Care
Solid wood is a natural material that responds to changes in moisture, temperature, and humidity. A little preparation and proper storage will help you get better results from your lumber and wood components.
Let the Wood Acclimate
Allow the wood to adjust to your shop or project environment before final milling, assembly, or finishing. Changes in humidity can cause solid wood to expand or contract.
Store It Flat and Supported
Keep wood dry, protected from direct sunlight, and supported so it cannot sag or twist. Whenever possible, allow air to circulate around the material rather than trapping moisture against one face.
Mill in Stages
For projects that require precise dimensions, remove material gradually and give the wood time to settle between major milling steps. Leave a little extra thickness or width until you are ready for final sizing.
Expect Natural Variation
Color, grain, figure, and texture vary from board to board. Lay out your project parts before cutting so you can make the most of the natural character and arrange grain and color where they look best.
Use Sharp, Appropriate Tools
Sharp blades and cutters generally produce cleaner surfaces and reduce tearout, burning, and unnecessary stress on the wood. Adjust your cutting approach for the grain direction and density of the material.
Test Your Finish First
Sand consistently and test stains, dyes, oils, or other finishes on an offcut or inconspicuous area first. Finish can change the color and contrast of natural wood dramatically.
Wood Species Guide
About African Mahogany
Khaya ivorensis Grows in Africa
Africa
West Africa, Ivory Coast, Central African Republic, Ghana, Nigeria
Compare African Mahogany with
Color Range
Light pink to reddish-brown or golden tan-brown.
About the Tree
Reaches heights of 140 feet with trunk diameter up to 72" above large buttresses. Bole will measure 40-80 feet.
Other Names
Diala iri, Akuk, Bandoro,Khaya mahogany, Benin mahogany, Ogwango, Bisselon, Senegal mahogany, Bitehi
Common Uses
Furniture, cabinets, interiors, boat building, veneer, desks, cabinets, entry doors, stairs, moldings and trim.
What Does The Janka Hardness Rating Mean?
The Janka hardness test is the international standard for measuring the resistance of a sample of wood to denting and wear.
It's expressed in psi, or pounds-per-square-inch. The test measures the pressure required to embed an 11.28mm (.444 in) diameter steel ball into wood to half the ball's diameter. The measurement was developed to determine whether a species is suitable for use as flooring; however, we include it here and compare it to the rating of red oak to help you make a buying choice.
There is a difference between hardness and being difficult to work with. Generally speaking, the harder the wood the easier it is to finish and polish. Harder woods create good, solid long-lasting joinery in furniture.
The hardness of wood varies with the direction of the wood grain, and varies from piece to piece. So a Janka rating is an average of numerous tests performed on all directions and numerous pieces. Use the Janka hardness rating as guide, not a definitive answer.
Image by Nasa-verve, Wikimedia Commons
Customer Reviews
Helpful Lumber Resources
Understanding hardwood lumber starts right here with these wacky fractions.
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.
Project Inspiration
Lumber Deals & Woodworking Tips
SIGN UP NOW to get a $10 coupon!
Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.
We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.
