Black Walnut Sink with Vanity
by Chad D
Sink was made from Woodworkers Source Black walnut. Each piece was cut out with band saw. An angle grinder with wood shaper disc was used to even most of the pieces out. Then finally an oscillating spindle saw to smoothen. Each piece was glued together with West Systems Epoxy (great stuff) which made an excellent seal. Then after sanding from 60 grit up to 320, Total boat epoxy was applied giving it a beautiful shine and bringing out the grain. After two coats, Varnish was applied. Thanks Woodworkers Source for the beautiful black walnut boards!!
Finish: Varnish over epoxy on Sink. Black stain with lear lacquer finish on vanity
No project plans available.
Project posted: