Cypress 4/4 Project Pack: 20 Board Feet

Cypress 4/4 Project Pack: 20 Board Feet
of Lumber

Ratings Snapshot
4.6
out of 5
5 (4)
4 (3)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
hardwood lumber sizes
13/16" Thickness
Also known as 4/4, S2S.
Surfaced 2 sides (S2S) to 13/16" actual thickness. May still require you to flatten, plane, shape or sand your project parts to fit your project.
Details in our blog: "What Does 4/4 Mean in Lumber?"
4" to 10" Widths
This is the range of widths that are usually available in this pack.
  • Price shown is for a random selection of widths within this range
  • Special hand-selection is avaialble at an additional fee, please contact to inquire
  • Edges are rough sawn
  • Straight edge ripping service is available for a small fee
48" to 96" Lengths
Lengths will vary within this range.
Some Shipping Restrictions:
  1. If you order 10 bd. ft. or less, your lumber will be cut to be shorter than 45" for shipping purposes. Request different lengths using the "Minimum Size Request" box on the order form
  2. 8' is the longest length we can reasonably ship by UPS & FedEx
  3. Longer lengths can be shipped truck freight instead; Please contact us to get a custom shipping quote if you need lengths longer than 8'
No Minimum Purchase
We're easy to buy from! That means we can cut you a short piece(s) from long boards if you want.

Here's a Little More Help

$214.00 /Pack

1-2 $214.00
3+ $192.60 /Pack (10% off)
Tip: mix or match for your best price! Details
Flat Rate U.S. Shipping
$0.00 West of Mississippi River
$20.00 East of Mississippi River
Details »

Order Form


Options

Customer Ratings & Reviews

7
Ratings Snapshot
4.6
out of 5
5 (4)
4 (3)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
4.6
out of 5
5 (4)
4 (3)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
7 Total Reviews
August 9, 2017
5 out of 5
Cypress for Adirondack chairs
Review by  Sparky from Peoria Illinois
Wood was excellent quality. It came well packaged. No knots. Boards were all 8' long by 7 1/2" - 8" in width with 5 boards in a pack. I had one side ripped. I made Norm Abram's Adirondack chair which took 1 - 20 board foot pack. Cypress is nice to work with. So far I've made 4 chairs. The cost is about $200 per chair but they are beautiful. I used 3-4 coats of General finishes Exterior 450 which is a clear satin water based topcoat. This brings out the natural beauty of the Cypress. This was my first time using Cypress and I love it. I like cedar but It makes me wheeze.
Verified Buyer
Recommended
August 8, 2017
4 out of 5
Cypress project pack
Review by  Glen  from Kirkland, Wa
The Cypress was packed well and the condition of the lumber was very good. The only thing that disappointed me was that the Cypress looked too much like ordinary pine boards. I bought it because the price was good and it looked better in the on-line photos. I'll make use of it. I would recommend Cypress lumber if you are aware what it looks like and it is what you want.
Verified Buyer
Recommended
October 6, 2016
4 out of 5
Very Nice but
Review by  Uncle Neubie from West Fargo, ND
Very nice but one board had cracks in the middle about 1/3 of the board.
Verified Buyer
Recommended
May 17, 2013
5 out of 5
Cypress 4/4 material
Review by  BER from Bellevue, WA USA
Good material- I had not worked with Cypress and found it a good alternative to Cedar. There was some mild checking in a few of the boards - but did not run all the way through the board thickness so i did not cut around it. Material was without twist, fairly clear boards, and any warping was easily dealt with. Boards were well packaged with no shipping damage. I would order this product again.
Recommended
April 17, 2013
5 out of 5
No Longer Nervous
Review by  Bill K. from Durham, NC USA
Woodworkers Source Craig: I was a little nervous since this was my first order with Woodworkers Source but the package arrived on time; the wood was in excellent condition; the right amount was ordered and shipped; and there will be very little waste. (I also enjoyed the parade encompassing the U.P.S. truck with the marching band and seven dancing girls!) Thank you for a job well done!
Recommended
September 29, 2012
4 out of 5
OK, but could be better
Review by  MWG from New York, NY USA
The cypress arrived in 4 or 5 boards. A few were clear, but two were gray toned. It would have been nice if the entire Project Pack were all clear so that the wood would look nice together...
Recommended
7 Total Reviews
We're Here to Help You Do Your Best Woodworking

You've Gotta Get Our E-Newsletter

Subscribe now and get our woodworking tips delivered weekly, plus get a $10 credit:

Project Help Articles

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Woodworking Tips & Advice Blog

Behind The Scenes w/ Instagram

Gallery of Customer Projects

No Minimum Order!
It's easy to buy from us & get what you need for your project
100% Satisfaction Guarantee!
We stand behind every order
Easy Online Ordering!
Secure & simple. Order any time, make selection requests, and get rapid status updates in your account


Connect

Join our newsletter

Subscribe to get woodworking tips and deals sent to your inbox, plus get a $10 coupon on your next order!

Subscribe

Woodworking Tips

Helping you do better woodworking

Visit Our Blog

3 Stores in Arizona

  • 18115 N. Black Canyon Hwy Phoenix, AZ, 85023
    800-423-2450
    602-504-1931

  • 645 W. Elliot Rd. Tempe, AZ, 85284
    480-355-5090

  • 3441 S. Palo Verde Rd Tucson, AZ, 85713
    520-745-8301

Copyright © 2017 Woodworkers Source | Home | Site Map