Maple Birds Eye 4/4 Craft Pack: 10 Board Feet of Lumber

Ratings Snapshot
5.0
out of 5
5 (3)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
Maple Birds Eye 4/4 Craft Pack: 10 Board Feet

$198.00 /Pack

1-2 $198.00
3+ $178.20 /Pack (10% off)
Tip: mix or match for your best price! Details
Flat Rate U.S. Shipping
$0.00 West of Mississippi River
$10.00 East of Mississippi River
Details


Board Foot Cheat Sheet
Learn How To Estimate Lumber Needs
hardwood lumber sizes
Birds Eye Maple lumber pack comes with an assortment of widths and lengths.
Here's what you can expect:
13/16" Thickness

Also known as 4/4, S2S.
Surfaced 2 sides (S2S) to 13/16" actual thickness. May still require you to flatten, plane, shape or sand your project parts to fit your project.

Learn more in our blog: "What Does 4/4 Mean in Lumber?"

3" to 8" Widths

This is the range of widths that are usually available in this pack.

  • Price shown is for a random selection of widths within this range
  • Special hand-selection is avaialble at an additional fee, please contact to inquire
  • Edges are rough sawn
  • Straight edge ripping service is available for a small fee

24" to 46" Lengths

You get a variety of lengths with the ends trimmed.

Here's the perfect assortment of boards for your small fine woodworking projects, or when you want to try just a little bit of this wood!
 
A 10 board foot Craft Pack is simple, plus we stand behind it with our 100% satisfaction guarantee. It includes a great mix of boards that total 10 board feet of hand-picked lumber, and you'll get a fantastic assortment of sizes: from 3'' to 8'' wide, and 24'' to 48'' long. All boards come surfaced on 2 sides (S2S) to 13/16'' thick, you can choose to have the boards planed down to a different thickness if you want thin lumber.

About Birds Eye Maple (Acer saccharum)

Weight

3.67

lbs /Bd. Ft.
2.51% heavier than red oak (3.58 /bd. ft.)
Hardness

1450

Janka Rating
12.40% harder than red oak (1290 psi)
Density

0.68

Specific Gravity
6.25% more dense than red oak (.64)

General Workability
Average 5/10
Red Oak

Wood Texture
V. Fine 2/10
Red Oak

Ease of Finishing
Average 5/10
Red Oak

map of where Birds Eye Maple tree grows
Birds Eye Maple is a domestic wood from North America

Figured with many small swirls resulting in circular eyes separate from each other - dubbed birds eye figure. Same species as typical hard white maple, yet featuring this distinctive figure. The wood is hard and heavy, very durable with a fine texture. Birds eye figure does pose problems with planing and some hand tool operations.

color of Birds Eye Maple
Color Range
Cream white to reddish brown.
the Birds Eye Maple tree
What's The Tree Like?
Produces sweet sap used to make maple syrup. Matures at heights of 90-120 feet with a trunk 24-36".
other names for Birds Eye Maple
Other Names
Hard maple, Rock maple, Sugar maple
uses for Birds Eye Maple
Some Typical Uses
Furniture, some cabinetry, high end pieces (furniture, interior trim and paneling, etc.) and fine accessories like jewelry boxes, desk clocks, etc.

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
lumber thickness Lumber Compared
Various lumber thickness as compared to one another
  1. Decide how much board footage you need
  2. Factor in enough to work with! You'll want to arrange grain patterns, sort color, fix mistakes, run test cuts, make finish samples, etc.
  3. Lumber comes in random widths and lengths. If you need special size considerations, please let us know by using the "Minimum Size Request" box in the order form or by confirming your needs by phone or email.
  4. Expect your final amount of footage to change slightly. Buying by the board foot is an exercise in estimation, therefore we don't know the precise amount of footage you'll receive (and be billed for) until we physically select the wood for your order.
  5. We want to get your order right! So we may need to contact you for clarification. Please use a good phone and email during checkout.

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our article if you want the full explanation.

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained

Customer Ratings & Reviews

3
Ratings Snapshot
5.0
out of 5
5 (3)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
5.0
out of 5
5 (3)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product?
100%
3 Total Reviews
  • 1
January 1, 2019
5 out of 5
Excellent Wood
Review by  Bill Krull from Lake Charles, Louisiana
The material from Woodworkers Source is consistintly high quality; professionally milled and always straight, true and largely free of defects. However, the true value of Woodworkers Source lies in the firm’s customer service. Cameron Kirk and all the personnel are friendly, dedicated to excellent performance and customer satisfaction and highly professional. The company also has a broad inventory of wood from which to choose.
Verified Buyer
Recommended
December 30, 2016
5 out of 5
Perfect packaging...on time delivery
Review by  Emmanuel  from NY
A couple of boards had few Birdseye figure...but all in all the boards they selected for me was great...I am a beginner when it comes to ruff lumber...so this is a learning experience.
Verified Buyer
Recommended
October 17, 2011
5 out of 5
Gorgeous
Review by  Ken McClure from Pensacola, Fl USA
Some of the prettiest birds-eye yet! I love this wood for trimming and adding special touches and the pack I received was wonderful!
Recommended
3 Total Reviews
  • 1
We're Here to Help You Do Your Best Woodworking

You've Gotta Get Our E-Newsletter

Subscribe now and get our woodworking tips delivered weekly, plus get a $10 credit:

Project Help Articles

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Woodworking Tips & Advice Blog

Behind The Scenes w/ Instagram

Gallery of Customer Projects

close