Mahogany Santos 4/4 Project Pack: 20 Board Feet of Lumber

Mahogany Santos 4/4 Project Pack: 20 Board Feet

$318.00 /Pack

1-2 $318.00
3+ $286.20 /Pack (10% off)
Tip: mix or match for your best price! Details
Flat Rate U.S. Shipping
$0.00 West of Mississippi River
$20.00 East of Mississippi River
Details


Board Foot Cheat Sheet
Learn How To Estimate Lumber Needs

hardwood lumber sizes
Santos Mahogany lumber pack comes with an assortment of widths and lengths.
Here's what you can expect:
13/16" Thickness

Also known as 4/4, S2S.
Surfaced 2 sides (S2S) to 13/16" actual thickness. May still require you to flatten, plane, shape or sand your project parts to fit your project.

Learn more in our blog: "What Does 4/4 Mean in Lumber?"

4" to 10" Widths

This is the range of widths that are usually available in this pack.

  • Price shown is for a random selection of widths within this range
  • Special hand-selection is avaialble at an additional fee, please contact to inquire
  • Edges are rough sawn
  • Straight edge ripping service is available for a small fee

48" to 84" Lengths

Lengths will vary within this range.

A 20 board foot Project Pack is a great way to buy some lumber because they're simple and we stand behind them with our 100% satisfaction guarantee. A Project Pack includes a total of 20 board feet of our hand-picked lumber, and you'll get a fantastic assortment of widths (typically between 4'' and 10''), and lengths (between 4' and 8'). Purchase a Project Pack when you need enough wood to make a medium sized project like a coffee table or cabinet. As usual, all the lumber is surfaced on two sides (S2S), and kiln dried.

About Santos Mahogany (Myroxylon balsamum)

Weight

4.83

lbs /Bd. Ft.
34.92% heavier than red oak (3.58 /bd. ft.)
Hardness

2200

Janka Rating
70.54% harder than red oak (1290 psi)
Density

0.78

Specific Gravity
21.88% more dense than red oak (.64)

General Workability
Average 5/10
Red Oak

Wood Texture
Fine 3/10
Red Oak

Ease of Finishing
Good 4/10
Red Oak

map of where Santos Mahogany tree grows
Santos Mahogany is an exotic wood from Latin America

Sometimes called Estoraque. Santos Mahogany does feature a strong color that gets darker with a finish, and the wood is extraordinarily durable. Santos Mahogany is hard, moderately difficult to saw, and has a high blunting effect on cutters. Sawdust from machining may cause respiratory irritation in some individuals. A dust mask or respirator is advised.

color of Santos Mahogany
Color Range
Fresh cut heartwood is reddish-brown, but darkens to deep red or somwhat purplish. Color variation between boards is moderate.
the Santos Mahogany tree
What's The Tree Like?
Heights up to 100 feet, but most commonly 50 to 65 feet. Trunk diameter of 18 to 36 inches.
other names for Santos Mahogany
Other Names
Balsamo, Cabriziva, Cedro chino, Chirraca, Estoraque, Incienso, Nabal, Palo de balsamo, Santos mahogany, Sandalo, Tache, Tolu
uses for Santos Mahogany
Some Typical Uses
Fine furniture, cabinets, interior millwork, flooring, entry doors, stairs and moldings.

lumber random widths Random Widths
You will cut and/or glue to create the sizes you need
rough sawn vs surfaced lumber Surfaced Smooth S2S
We buy rough sawn lumber and have it surfaced 2 sides (S2S) so you're ready to work
rough sawn vs surfaced lumber Kiln Dried
We stock kiln dried lumber and store it in a protected warehouse
rough sawn vs surfaced lumber 83%+ Clear
Unless stated otherwise, we stock Select & Better graded lumber that's at least 83% clear one side
  1. Decide how much board footage you need
  2. Factor in enough to work with! You'll want to arrange grain patterns, sort color, fix mistakes, run test cuts, make finish samples, etc.
  3. Lumber comes in random widths and lengths. If you need special size considerations, please let us know by using the "Minimum Size Request" box in the order form or by confirming your needs by phone or email.
  4. Expect your final amount of footage to change slightly. Buying by the board foot is an exercise in estimation, therefore we don't know the precise amount of footage you'll receive (and be billed for) until we physically select the wood for your order.
  5. We want to get your order right! So we may need to contact you for clarification. Please use a good phone and email during checkout.

This is the unit of measurement for hardwood lumber when it's bought/sold in random widths and random lengths.

Board footage is a measurement of volume, and it's abbreviated Bd. Ft.

One board foot is equal to 144 cubic inches.

board foot formula

It's a fraction that refers to rough (RGH) sawn thickness of lumber, and it tells you approximately how many quarters of an inch make up the thickness.

Surfaced lumber is thinner because it started out as rough sawn but it's been planed smooth. Planing removes thickness.

Rough Sawn (RGH) Surfaced (S2S)
4/4 ~1" 13/16"
5/4 ~1-1/4" 1-1/16"
6/4 ~1-1/2" 1-5/16"
8/4 ~2" 1-13/16"
12/4 ~3" 2-13/16"

Unless otherwise specified, our lumber is "Surfaced 2 Sides" or S2S for short.

Check out our blog for the full explanation.

lumber thickness Lumber Compared
Various lumber thickness as compared to one another

If you can cut your own pieces to size, here's how we can help:

  1. Enter requirements into the order form where it says, "Minimum Size Request"
  2. Tell us what you want to acheive or make
  3. You will receive wood that can yeild what you need. (You will create the final size)
  4. We may need to contact you for clarification

You will cut and/or join your material to create the finished sizes you need. We'll pick out wood that will give you enough to do that. For this reason, the final amount of footage you receive in your order will be slightly different, and your final billed charge will be different.

If you want to only buy pieces of an exact size, that will be sold differently. Please contact us for a custom quote.

Sadly, wood cannot be 100% guaranteed to be clear on both sides all the time. Most of our lumber is graded "Select" and better, which means it's at minimum 83% clear on one side.
Hardwood grades explained

Customer Ratings & Reviews

Be the first to rate this item!

Write Review

Videos, Articles, and Project Photos to Help You Do Woodworking
What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *

close