JET Shaper: JWS-35X5-1, Industrial Shaper, 5HP, 1Ph Shipped to You! Lowest Price on Wood Working Machinery JET and Powermatic from Woodworkers Source

Customer Rating not reviewed

JET Shaper: JWS-35X5-1, Industrial Shaper, 5HP, 1Ph Model: 708326

One Fantastic Tool
This heavy-duty JET Shaper is available with a powerful 5HP, 1Ph motor with magnetic controls. The four-speed (4000, 6000, 8000, 10000 RPM) step pulley drive with quick release lever allows you to select the best speed and torque for different cutter diameters. The spindle is reversible, and receives maximum power transfer from the v-belt. The independently adjustable fences have micro adjust controls for precise positioning.

Check Out These Features

Four-speeds 4000, 6000, 8000, 10000 RPM let you select the best speed and torque for different cutter diameters

Powerful 5HP, 1Ph motor with magnetic controls

Large 26-3/4” X 32-1/4” precision ground cast iron table provides a durable work area, predrilled for power feeder

Poly-V-belt transfers maximum power to the spindle

Starting Pins for irregular shaping

Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs

Extra-large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments

Reversible spindle speeds for diverse shaping jobs

4" Dust port built into fence for convenient hookup to any dust collection system

Spindle lock for safe and easy cutter set-up

Spindle height scale

Specifications:

Brand Jet

Digital Readouts n.a.

Dust Collection Minimum CFM Required 400 cu.ft/min

Dust Port Outside Diameter 4 "

Electrical Controls - Magnetic Starter Yes

Fence Size (L x H) 4 3/4 x 16 "

Fence Travel (Major and Minor) 4 and 1 "

Height 41 inch

Length 30 inch

Maximum Diameter Cutter Above Table 7½ "

Maximum Diameter Cutter Below Table 6 "

Model Number JWS-35X5-1

Motor Current 17 A

Motor Phase 1 Ph

Motor Power 5 HP

Motor Voltage 230 V

Net Weight 473 pound

Part Number 708326

Prewired Voltage 230 V

Reversable Yes

Router Bit Collet Diameter 1/4 and 1/2 " (optional)

Slide Table Size (L x W) n.a.

Spindle Diameter 1 1/4 "

Spindle Size Under Nut 4 "

Spindle Speed 4000, 6000, 8000 and 10,000 RPM

Spindle Travel 4

Table Height From Floor 33.25 "

Table Insert Opening Diameter 2 9/16 and 4 5/16 “

Table Inserts 2

Table Opening Diameter 6 19/64 "

Table Size 26 3/4 x 32 1/4 "

Table T-Slot 3/4 x 3/8 "

Table Travel n.a.

Tilting Spindle n.a.

Width 40 inch

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Average Customer Rating: Not yet rated
You can rate it and share your thoughts with others.

There are no reviews