JET Shaper: JWS-25X 3hp, 1ph Shipped to You! Lowest Price on Wood Working Machinery JET and Powermatic from Woodworkers Source

Customer Rating not reviewed

JET Shaper: JWS-25X 3hp, 1ph Model: 708309

One Fantastic Tool
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port.

Check Out These Features

Two-speeds let you select the best speed and torque for different cutter diameters

Independently adjustable left and right fences, standard with a micro adjust control for precise positioning

Large 25” X 25-1/2” precision ground cast iron table provides a durable work area

Poly-V-belt transfers maximum power to the spindle

Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs

Reversible spindle speeds for diverse shaping jobs

Powerful 3HP, 1Ph motor with magnetic controls

Starting pins for irregular shaping

Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments

4” Dust port built into fence for convenient hookup to any dust collection system

Spindle lock for safe and easy cutter set up

Spindle height scale

Specifications:

Brand Jet

Digital Readouts n.a.

Dust Collection Minimum CFM Required 350 cu.ft/min

Dust Port Outside Diameter 4 "

Electrical Controls - Magnetic Starter Yes

Fence Size (L x H) 14 1/2 x 4 3/4 "

Fence Travel (Major and Minor) 4 1/4 and 15/16 "

Height 23 inch

Length 43 inch

Maximum Diameter Cutter Above Table 7 "

Maximum Diameter Cutter Below Table 6 "

Model Number JWS-25X

Motor Current 16 A

Motor Phase 1 Ph

Motor Power 3 HP

Motor Voltage 230 V

Net Weight 331 pound

Part Number 708309

Prewired Voltage 230 V

Reversable Yes

Router Bit Collet Diameter 1/4 and 1/2 " (optional)

Spindle Diameter 1/2 and 3/4 "

Spindle Size Under Nut 1/2 (2 13/64) and 3/4 (3 3/16) "

Spindle Speed 7500 and 10,000 RPM

Spindle Travel 3

Table Height From Floor 33 "

Table Insert Opening Diameter 2 9/16 and 4 21/64 "

Table Inserts 2

Table Opening Diameter 6 9/32 "

Table Size 25 x 25 1/2 "

Table T-Slot 3/4 x 3/8 "

Tilting Spindle n.a.

Width 25 inch

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Average Customer Rating: Not yet rated
You can rate it and share your thoughts with others.

There are no reviews