JET 10'' Table Saw: JWTS-10, 1-1/2HP Workshop Tablesaw Shipped to You! Lowest Price on Wood Working Machinery JET and Powermatic from Woodworkers Source

Customer Rating not reviewed

JET 10'' Table Saw: JWTS-10, 1-1/2HP Workshop Tablesaw Model: 708100

One Fantastic Tool
The JWTS-10 Workshop tablesaw is ideal for big jobs in a small area. The 1.5 HP maxi-torque motor powers the 10" blade with an exclusive double drive power system that transfers more power to the arbor than the conventional belt drive tablesaw.

Check Out These Features

Surface ground cast iron table with miter slots and beveled edge provides a sturdy, flat work surface

Steel extension wings increase your work area for larger work pieces

See through blade guard with splitter and anti-kickback pawls helps protect operator while giving a clear view of the material being cut

1-1/2HP maxi-torque 115V/230V motor prewired for 115V operation

Exclusive double-drive power system transfers more power to the arbor than conventional belt-drive systems

One-piece trunnion design offers increased strength and rigidity for more accurate cutting

Miter gauge with positive stops for accurate cross-cutting and mitering

Horizontally braced steel leg stand adds strength and stability to the saw

Left tilting for more controlled bevel cutting

Shrouded Blade increases dust collection efficiency

10" Blade included

Specifications:

Arbor Diameter 5/8 "

Arbor Speed 3600 RPM

Blade Diameter 10 "

Brand Jet

Dust Collection Minimum CFM Required 350 cu.ft/min

Dust Port Outside Diameter 2½ "

Family Description 10" CONTRACTOR TABLE SAW

Height 18.5 inch

Length 33 inch

Maximum Depth of Cut 3 1/8 "

Maximum Depth of Cut at 45 Degrees 2 1/8 "

Maximum Diameter of Dado 8 "

Maximum Rip Left of Blade 12 "

Maximum Rip Right of Blade 30 "

Maximum Width of Dado 13/16 "

Model Number JWTS-10

Motor Current 12 / 6 A

Motor Phase 1 Ph

Motor Power 1½ HP

Motor Voltage 115 / 230 V

Net Weight 212 pound

Overall Dimensions 42 x 56 x 40

Part Number 708100

Prewired Voltage 115 V

Table Height 36½ "

Table in Front of Saw Blade at Maximum Depth of Cut 10½ "

Table Size with Standard Extension (L x W) 27 x 44 "

Table Size without Extension (L x W) 20 x 27 "

Width 30 inch

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Average Customer Rating: Not yet rated
You can rate it and share your thoughts with others.

There are no reviews