|
|
Home
> Power Equipment
> Shapers
> Powermatic Shaper: Model TS29, 7-1/2HP, 3Ph, 230V/460V with Sliding Table
Powermatic Shaper: Model TS29, 7-1/2HP, 3Ph, 230V/460V with Sliding Table
|
|
|
|
List Price: |
$13123
ea. |
On Sale:
|
$8,553.00
ea.
|
| You Save: |
$4,570.00
|
| Shipping: |
$25.00 anywhere in the 48 U.S. |
|
|
|
|
Powermatic Shaper: Model TS29, 7-1/2HP, 3Ph, 230V/460V with Sliding Table Model: 1791284
One Fantastic Tool The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.
Check Out These Features
- Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons
- Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability
- Large table with built-in slider with room for stock feeder
- 7" vertical spindle travel allows stacked tooling
- Spindle tilts negative 5° to positive 45° for increased versatility
- Large diameter multiple table inserts accomodate virtually any size cutter
- Five spindle speeds in forward and reverse with lighted indicator
|
|
Specifications: - Dust Collection Minimum CFM Required 800 cu.ft/min
- Dust Port Outside Diameter 5 " (dual ports)
- Electrical Controls - Magnetic Starter Yes
- Fence Size (L x H) 46 x 5 "
- Fence Travel (Major and Minor) 5 3/8 and 3 5/8 "
- Maximum Diameter Cutter Above Table 12 "
- Maximum Diameter Cutter Below Table 9 "
- Motor Voltage 230 / 460 V
- Overall Dimensions 51 x 44 x 53
- Router Bit Collet Diameter 1/4 and 1/2 "
- Slide Table Size (L x W) 11 1/4 x 51 1/4 "
- Spindle Diameter 3/4, 1 and 1 1/4 "
- Spindle Size Under Nut 3/4 (3 1/2), 1 (6 1/4) and 1 1/4 (6 1/4) "
- Spindle Speed 3000, 4000, 6000, 8000 and 10,000 RPM
- Table Inserts one tilting, two straight
- Table Size 51 1/2 x 33 1/2 "
- Tilting Spindle 45° forward, 5° back
|
 | WARRANTY AND SERVICE
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.For more informaton click HERE |
Average Customer Rating: Not yet rated
You can rate it and share your thoughts with others.
|
|
|
|
|
|
|
|