Powermatic Planer Molder 5HP 1PH Shipped to You! Lowest Price on Wood Working Machinery JET and Powermatic from Woodworkers Source

Customer Rating not reviewed

Powermatic Planer Molder 5HP 1PH Model: 1120003

One Fantastic Tool
The PM15 Planer/Molder from POWERMATIC® is loaded with features that make it a standout. A large 5HP motor supports a 15" wide planing capacity and enough power to run double knife sets for molding. The stand is fully enclosed and equipped with integral casters for shop mobility. Two feed speeds, 10 and 20 FPM, allow you to operate quickly for maximum stock removal, or more slowly to yield a fine milled finish on decorative moldings. The hinged top has a 4" dust collection port, and opens to expose the cutterhead, allowing for fast and easy tooling changes. This machine will use either single molding knives or 3 knife sets.

Check Out These Features

5HP motor powers through big jobs

15" planing capacity is wide enough to run double molding knife sets

Easy-to-read depth of cut scale with large handwheel for quick set ups

Two feed speeds provide maximum stock removal or a fine milled finish for decorative moldings

Feed rollers and cutterhead supported by full cast iron head assembly

Machine uses single or three piece molding knives, providing a wide selection of profiles

Hinged top for fast, easy tooling changes

Fully enclosed base cabinet with integrated casters for complete mobility

Cast iron table is supported by 4 lead screws and height is controlled by chain and sprocket for precise depth of cut

Standard Equipment:

Two-speed gearbox

Tool kit

Dust chute

Integrated casters

3 High speed steel planer knives

Knife setting gauge

Specifications:

Brand Powermatic

Cuts Per Minute 13500

Cutterhead Diameter 2 7/8 "

Cutterhead Speed 4500 RPM

Dust Collection Minimum CFM Required 900 cu.ft/min

Dust Port Outside Diameter 4 "

Feed Rate - Molding 10, 20 FPM

Feed Rate - Planing 10, 20 FPM

Height 51 inch

Infeed Roller Diameter 1½ "

Length 28 inch

Maximum Depth of Cut - Molding ¾ "

Maximum Depth of Cut - Planing 1/8 "

Maximum Planing Thickness 6 1/8 "

Minimum Planing Length 8 "

Model Number PM15

Motor Phase 1 Ph

Motor Power 5 HP

Motor Voltage 230 V

Net Weight 423 pound

Number of Knives 3

Outfeed Roller Diameter 1½ "

Overall Dimensions 28 x 34 x 51

Part Number 1120003

Prewired Voltage 230 V

Scale/Cursor inches & millimeters

Table Height Adjustment 1 Turn = 1/16"

Table Size 27 1/2 x 15 1/8 "

Width 34 inch

Working Width 15 "

WARRANTY AND SERVICE

Walter Meier (Manufacturing) Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier (Manufacturing) Inc. Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
For more informaton click HERE

Average Customer Rating: Not yet rated
You can rate it and share your thoughts with others.

There are no reviews